Appendix 5 Q&A - ETS 1 Operation Manual

APPENDIX 5 Q&A
For more details about Q&A, please visit our official website:
Question
I can connect to this camera in my
house or office where it's installed
with wireless network.
But when I leave my house or office, I
can't connect to it from my mobile
phone (with 3G network), or other PC
(connected to Internet). Why?
My live images are not fluent. Why?
The live video keeps flickering. Why?
www.eagleeyescctv.com
Answer
You didn't configure this camera to Internet, but only in LAN.
Please follow the steps in the advanced network setup guide
downloadable from www.surveillance-download.com/user/m359a.swf
complete network configurations, or it's recommended for you to check
with your local installer or reseller for this service because it's usually hard
for a person who doesn't have network knowledge to set network
configurations.
Image fluency could be affected by the local network upload bandwidth,
router efficiency, client network download bandwidth, complexity of live
view, and more.
(Recommended) To have the best image fluency, select QVGA; to have
the best image quality, select "SXVGA" based on the model you have; to
have normal image fluency and quality, select "VGA".
Please try adjusting the power line frequency to "60 Hz" or "50 Hz" for the
camera.
For iPhone users, access the camera, and select "
corner to enter IPCAM Configuration page. Then, go to "Advance Setup"
 "Camera" to change setting.
For access from Internet Explorer, log into the camera, and select
"Config."  "Camera"  "Camera".
46
to
" on the top right