Table of Contents
Advertisement
3.8.7 Maintenance
Firmware Upgrade
This function is used when users need to upgrade the camera for function scalability.
Note: Before using this function, make sure you have the correct upgrade files provided by your
installer or distributor.
Note: The event videos saved in the camera will be removed after firmware upgrade. Make sure you've
copied important events to your PC before firmware upgrade.
Step1: Select "
" to browse to where you save the upgrade files, and select them one by one until all files are
selected (up to four files).
Step2: Select "Upgrade" to start system upgrading.
Note: You'll be prompted to keep current configurations. It's recommended to keep them, or all
configurations will be restored to default values after upgrade.
Note: It takes a few minutes to finish the upgrade process. Do not disconnect the power during
firmware upgrade, or the upgrade may be failed. The camera will reboot after the upgrade.
29
Advertisement
Table of Contents
