Sms - ETS 1 Operation Manual

3.2.7 SMS

Note: Before using this function, you need to apply an account and get an API ID from the mobile
messaging company, such as Clickatell and EVERY8D. For details, please refer to "APPENDIX 4
API ID APPLICATION FOR SMS MESSAGING" at page 44.
Enter the detailed information needed for text messaging, and click "Save" to confirm. The information you set
here will be applied when "SMS" is selected in "General" → "Trigger".
Function
System
User name / Password
API ID
Recipient
Transfer Interval
Reset Counter
Message
Test
Description
The text messaging service provider is Clickatell.
Enter the account user name and password you created in Clickatell.
Enter the API ID you applied from Clickatell.
Click "Add" to enter the phone number, including the country code, to receive the text
message. Five sets of phone numbers are allowed.
Set the interval time in minutes between two-message sending.
The options are 0, 15, 30 & 60.
Click to restart the text messaging, and the SMS will be sent after the specified time interval
since you click this button.
Enter the text content (up to 70 characters) you want to send with the text message.
To know whether your SMS setting is correct, click this button to immediately send a SMS to
your phone.
Note: This testing is not free and you will be charged for SMS sending base on your
local rate.
14