Download Print this page

Troubleshooting; Cleaning And Storage; Specifications; Operating Instructions - Pelonis HC-0155M Owner's Manual

Tower ceramic heater

Advertisement

SAFETY FEATURES
Thermal Cut-Off:This heater includes a Thermal Cut-Off Overheat Protection
System that shuts the heater off if it overheats due to abnormal conditions. If this
occurs,turn the heater "OFF",unplug it, and inspect and remove any objects on or
adjacent to the heater.Allow it to cool for a few minutes,plug it back in,and resume
normal operation.
TROUBLE SHOOTING
If your heater fails to perate,please follow these instructions:
● Ensure that your circuit breaker or fuse is working properly.
● Be sure the heater is plugged in and that the electrical outlet is working
properly.
● Check for any obstruction.If you find any obstruction,turn the heater "OFF".
Unplug the heater and wait a few minutes for it to cool down.Carefully remove
the obstruction. Plug the heater in and turn it on again by referring to the

OPERATING INSTRUCTIONS.

CLEANING AND STORAGE

It is recommended that the heater be cleaned at least one time during the
operating season in order to provide the optimum level of performance.
ALWAYS TURN THE POWER SWITCH OFF AND UNPLUG THE
HEATER BEFORE CLEANING.
Be sure to save the box for off-season storage.
● Turn the heater " OFF",unplug it and wait for the heater to cool down.
● Use a dry cloth to clean only external surfaces of the heater.
● Do not use any cleaning agents or detergents.
● Never immerse the heater in water.
● Pack the heater in the original carton and store it in a cool and dry place.

SPECIFICATIONS

Model No: HC-0155M
Voltage: 120V,60Hz
Current: Maximum contimuous draw: 12.5Amps.
Output: 5200 BTUs
Power: LOW=900 Watts,HIGH=1500 Watts
Tolerances on all specifications:Approximately +5%,-10%
3

Advertisement

loading