Locating Heater - ProFusion EH-4604B Instruction Manual

inspecting cleaning or servicing the hater. This is a precaution to prevent serious electric
shock.
7. This heater is not suitable for use in hazardous locations as defined by the national fire
protection association(NFPA) in the united states. This heater has hot and arcing sparking
parts inside. Do not use it in areas where gasoline paint or flammable liquids are used or
stored.
8. This heater is not suitable for use in corrosive atmospheres such as marine greenhouses or
chemical storage areas.
9. This heater must be mounted at least 8 feet off the floor.
Improper installation or failure to follow the procedures outlined in this instruction
manual can result in serious electrical shock.

LOCATING HEATER

Install heater out of traffic areas maintaining clearances stated in figure 2 . The direction of air flow
should not be restricted is by columns or machinery and the air flow should wipe exposed walls rather
than blowing directly on them. When more than one heater is used in an area the heaters should be
arranged so that the air discharge of each heater supports the air flow of the others to provide best
circulation of warm air as indicated in figure 3.
Figure 2