Specifications; General Safety Information - ProFusion EH-4604B Instruction Manual

DESCRIPTION
Electric utility heaters are designed to meet a variety of heating requirements by switching a few wires
located in the base of the unit. Heat output is 25 589 BTU per hour. Features horizontal and vertical flow
horizontal air flow. Built-in thermostat with overheating safety thermal cutout.

SPECIFICATIONS

Rating
7500W II 240V
6250W I 240V

GENERAL SAFETY INFORMATION

: This heater requires hardwire installation (no plug). The
installation of this product must be carried out by a Certified Electrician
and in accordance with all local and national electrical codes.
Read and understand all installation and operation instructions and
observe all safety instructions.
1. Use only copper wires rated for at least 60ºC.
2. Heater air flow must be directed parallel to or away from adjacent wall.
3. Observe wall, floor and ceiling clearance requirements.
4. All wiring must be done according to national and local electrical codes in the united states
and the heater must be grounded as a precaution against possible electrical shock. Heater
circuit must be protected with proper fuses.
5. The mounting structure and the anchoring hardware must be capable of reliably supporting
the weight of the heater and if used the mounting bracket.
6. All electrical power must be disconnected and the main service box must be locked before
AMPS
31.3
26.1
BTU/hour
25589
21331