Exmark Metro Series Operator's Manual page 26

For ECS Handles: To lock the drive levers in "neutral lock", squeeze the drive
levers to the "neutral" position. See Figure 16 (b). Place thumbs on the inner
thumb lobe of the neutral lock /park brake latches and rotate them to the "neutral"
position. See Figure 16 (c). Release the drive levers.
To lock the drive levers in "park brake", squeeze the drive levers farther to the
"brake" position. Place thumbs on the inner thumb lobe of the neutral lock/park
brake latches and rotate them to the "park" position. See Figure 16 (d). Release
drive levers.
POTENTIAL HAZARD
♦ If the neutral lock/park brake latches are not completely
engaged the drive levers could unexpectedly slip into the
forward drive position.
WHAT CAN HAPPEN
♦ If the drive levers slip into the drive position, the unit could lurch
forward and cause injury or property damage.
HOW TO AVOID THE HAZARD
♦ Be sure the drive levers are securely seated at the bottom of the
"neutral" or "park" areas of the neutral lock latches.
To place the drive levers in the "drive" position, slightly squeeze the drive levers
while placing thumbs on the outer thumb lobe of the neutral lock/park brake
latches (or the index finger on the front lobe) and rotate them from under the drive
levers. Slowly and carefully release the drive levers. See Figure 16 (a).
(a)
(c)
DRIVE LEVER, NEUTRAL LOCK/PARK BRAKE LATCH OPERATION
4.3.5 Drive Wheel Engagement and Turning:
With drive levers in the "neutral" or "park brake" position, shift transmission into
desired gear. Squeeze both drive levers and move both neutral lock/park brake
latches from the "neutral" or "park brake" position to the "drive" position.
For straight ahead motion: Smoothly release both drive levers to engage drive
wheels.
For turning: Squeeze the right hand drive lever to turn right and left hand drive
lever to turn left (See Section 4.1.3).
CAUTION
(b)
(d)
FIGURE 16
- 21 -