Advertisement
4
Press ENTER
.
Other Operations
The track/file is programmed.
The program step number appears, followed by
the total playing time.
(Example: audio CD)
Using the display
Checking the information of an audio CD
Press
twice to cancel Resume Play.
The total number of tracks and total playing time
Step number
appear on the display.
Checking MP3/WMA/AAC file information
Last programmed track number
Press DISPLAY
repeatedly while playing an
MP3/WMA file on the disc or an MP3/WMA/AAC
file on the USB device.
The display changes as follows:
Song title ( )*
1, 2
Total playing time*
Artist name ( )*
1
* "--:--" appears when programming an MP3/WMA
disc/USB device or when the total playing time is
longer than 100 minutes.
Album name (
)*
1
5
Repeat steps 3 and 4 to program additional
tracks/files.
6
Current file number and playing time*
3
Press
to start Program Play.
The created program remains available until you
*
1
If the file does not have corresponding ID3, WMA or AAC
open the CD compartment, connect another USB
tag information, the file name, "NO ARTIST," and "NO
device or turn off the power of the unit. To play
ALBUM" scroll on the display instead of the song title,
the same program again, press
artist name, and album name.
*
2
The function name is displayed for 2 seconds before the
Note
song title appears.
If you try to program 26 tracks/files or more, "FULL" flashes
*
3
The artist name or album name will change to this in a
on the display.
few seconds.
To display programmed track/file
Checking the connected BLUETOOTH
information
device name
After creating your own program, you can check
information about programmed tracks/files.
Press DISPLAY
while connecting the
BLUETOOTH device.
Press DISPLAY
repeatedly and the display
changes as follows:
Checking the radio information
Total number of steps Last programmed track/
file number and the total playing time*
Press DISPLAY
repeatedly while listening to
the radio.
* "--:--" appears for MP3/WMA discs and USB devices.
The display changes as follows:
To cancel Program Play
Preset number*
1, 2
Frequency
Press
to stop playback, and then press PLAY
*
1
A preset number is displayed only when you are listening
MODE
repeatedly until "PGM" disappears from
to the preset radio station.
the display.
*
2
The display automatically returns to the frequency display
after 2 seconds have elapsed.
To delete all tracks/files in the current
program
Stop playback, and then press
Selecting play mode
appears and you can create a new program,
following the procedure "Creating your own
program (Program Play)."
You can set the unit to play tracks or files repeatedly
or in random order while a disc/USB device is
stopped.
Presetting radio stations
Press PLAY MODE
repeatedly.
You can store radio stations in the unit's memory.
You can preset up to 30 radio stations, 20 for FM and
10 for AM.
1
Press FM/AM
repeatedly to turn on the
Each time you press the button, the indication
changes as follows:
radio function and select the band "FM" or
"AM."
Normal play (None)
2
Hold down FM/AM
until "AUTO" flashes on
the display.
Single repeat (
1)
All repeat (
)
Selected folder play (
)*
3
Press ENTER
to store the station.
The stations are stored in memory from lower
Selected folder repeat play (
,
)*
frequencies to higher ones.
Shuffle play (
)
If a station cannot be preset
automatically
Program play (PGM)
You need to preset a station with a weak signal
manually.
1
Press FM/AM
repeatedly to select a band.
Program repeat play (
, PGM)
2
Tune to the desired station.
3
* These functions are available only when playing MP3/
Hold down ENTER
until "FM-xx" or "AM-xx"
WMA files on an MP3/WMA disc or MP3/WMA/AAC files
flashes on the display.
on a USB device.
(Example: FM)
Playing tracks/files repeatedly (Repeat
Play)
You can set the unit to repeatedly play CD-DA tracks
on an audio CD, MP3/WMA files on a CD-R/CD-RW
disc, or MP3/WMA/AAC files on a USB device in
4
Press PRESET + or
until the preset
normal and program play modes.
number for the station you want flashes on
1
Press CD
or USB
to turn on the CD or
the display.
USB function.
5
Press ENTER
to store the station.
2
Proceed as follows.
If another station is already assigned to the
selected preset number, that station is replaced
To repeat
Do this
by the new one.
1 Press PLAY MODE
A single track/
Tip
repeatedly until "
1" appears.
file
The preset radio stations remain in the unit's memory even
2 Press or to select
in the following situations.
a track/file that you want to
The AC power cord is unplugged.
repeat.
The batteries are removed.
3 Press .
1 Press PLAY MODE
All tracks/files
repeatedly until " " appears.
Listening to preset radio stations
2 Press .
1 Press PLAY MODE
A selected folder
1
Press FM/AM
repeatedly to turn on the
on an MP3/WMA
repeatedly until " " and " "
radio function and select the band "FM" or
appear.
disc or USB
"AM."
2 Select a folder by pressing
+
device
2
Press PRESET + or
or .
to select a stored
3 Press .
preset number for the desired radio station.
1 Program tracks/files (see
Programmed
"Creating your own program
tracks/files
Using the Sleep Timer
(Program Play)").
2 Press PLAY MODE until
"PGM" and " " appear on the
You can set the unit to turn off automatically after a
display.
set time has elapsed.
3 Press .
1
Press SLEEP
.
To cancel Repeat Play
The default setting ("90") appears and the
Press
to stop playback, and then press PLAY
"SLEEP" indicator lights up on the display.
MODE
repeatedly until " " (or "
1") disappears
2
Press SLEEP
repeatedly to select the
from the display.
desired setting.
Playing tracks/files in random order
(Shuffle Play)
You can set the unit to play CD-DA tracks on an
audio CD, MP3/WMA files on a CD-R/CD-RW disc or
MP3/WMA/AAC files on a USB device in random
Each time you press the button, the duration (in
order.
minutes) changes on the display, and the
selected setting is confirmed automatically after
1
Press CD
or USB
to turn on the CD or
about 4 seconds.
USB function.
2
Tip
Press PLAY MODE
repeatedly until " "
You can check the time left until the unit turns off by
appears on the display.
pressing SLEEP
again after setting the sleep timer.
3
Press
to start Shuffle Play.
To cancel Shuffle Play
Connecting optional components
Press
to stop playback, and then press PLAY
MODE
repeatedly until "
" disappears from the
display.
You can enjoy the sound from an optional
component, such as a portable digital music player,
Tip
through the speakers of this unit.
During Shuffle Play, you cannot select the previous track/file
Be sure to turn off the power of each component
by pressing
.
before making any connections.
For details, refer to the instruction manual of the
Creating your own program (Program
component to be connected.
Play)
1
Connect the AUDIO IN jack
You can arrange the playing order of up to 25
tracks/files on a disc/USB device.
output jack of the portable digital music
1
player or other component using an audio
Press CD
or USB
to turn on the CD or
connection cable (not supplied).
USB function.
2
Turn the connected component on.
2
Press PLAY MODE
repeatedly until "PGM"
3
Press AUDIO IN
and start playing sound on
appears on the display.
3
the connected component.
Press or
to select a track/file.
The sound from the connected component is
When you want to specify a folder that contains
output from the speakers.
+ or
MP3/WMA/AAC files, press
first to
select a folder, and then press or
to
To connect the unit to a TV or video recorder/
select a file.
player, use an extension cable (not supplied) with
a stereo-mini jack on one end and two phono
plugs on the other end.
Additional Information
Precautions
Discs that this unit CAN play
Compatible devices
Audio CD (CD-DA*
CD-R/CD-RW that contains MP3/WMA files and
Compatible USB devices
Compatibility requirements for the USB devices are
*1
as follows. Before using a device with this unit,
check that it meets the requirements.
*2
Compliance with USB 2.0 (Full Speed)
Supports Mass Storage mode*
* Mass Storage mode is a mode that allows a USB device
Discs that this unit CANNOT play
to become accessible to a host device, enabling file
transfers. Most USB devices support Mass Storage
CD-R/CD-RW other than those recorded in audio
mode.
Notes on the USB device
CD-R/CD-RW of poor recording quality, CD-R/
When a USB device is connected, the unit reads all the
files on the device. If there are many folders or files on the
device, it may take a long time for the unit to finish
reading them.
Do not connect a USB device to the unit through a USB
CD-R/CD-RW that is unfinalized or finalized
hub.
With some connected USB devices, after an operation is
performed, there may be a delay before it is performed by
Notes on discs
this unit.
Clean the CD with a cleaning cloth if
This unit may not support all the functions provided with
a connected USB device.
The playback order on this unit may differ from the
playback order on a connected USB device.
.
Do not use solvents such as
Compatible BLUETOOTH devices
Compatibility requirements for the devices are as
follows. Before using a device with this unit, check
that it meets the requirements.
Do not expose the CD to direct sunlight or heat
Devices must conform to BLUETOOTH Standard
version 2.1 + EDR.
Devices must support A2DP (Advanced Audio
Distribution Profile) and AVRCP (Audio/Video
Do not stick paper or a sticker on the CD, or
Remote Control Profile).
NFC capability (required only when using the NFC
After playing, store the CD in its case.
pairing function of the unit).
For the latest information on compatible
Note on DualDiscs
BLUETOOTH devices, including NFC-compatible
A DualDisc is a two sided disc product which
smartphones, check the websites below.
For customers in the USA:
http://esupport.sony.com
For customers in Canada:
(English)
http://sony.ca/support
Music discs encoded with copyright
(French)
protection technologies
http://fr.sony.ca/support
. "NO STEP"
This product is designed to playback discs that
What is BLUETOOTH wireless
technology?
BLUETOOTH wireless technology is a short-range
wireless technology that enables wireless data
communication between digital devices, such as a
On safety
computer and digital camera. BLUETOOTH wireless
As the laser beam used in the CD player section is
technology operates within a range of about 10 m
(33 feet).
Connecting two devices as necessary is common,
but some devices can be connected to multiple
Should any solid object or liquid fall into the unit,
devices at the same time.
You do not need to use a cable for connection, nor is
it necessary for the devices to face one another,
such is the case with infrared technology. For
Discs with non-standard shapes (e.g., heart,
example, you can use such a device in a bag or
pocket.
BLUETOOTH standard is an international standard
supported by thousands of companies all over the
On power sources
world, and employed by various companies
worldwide.
For AC operation, use the supplied AC power cord;
Maximum communication range
Unplug the unit from the wall outlet if it is not to
Maximum communication range may shorten under
the following conditions.
When not using the batteries, remove them to
There is an obstacle such as a person, metal, or
wall between the unit and BLUETOOTH device.
A wireless LAN device is in use near the unit.
On placement
A microwave oven is in use near the unit.
A device that generates electromagnetic radiation
Do not leave the unit in a location near heat
is in use near the unit.
The unit is placed on a shelf made of steel.
Do not place the unit on an inclined or unstable
The unit
Do not place anything within 10 mm (
Since a strong magnet is used for the speakers,
Steel cabinet
On operation
Optimal performance
If the unit is brought directly from a cold to a
Limited performance
Interference from other devices
Because BLUETOOTH devices and wireless LAN
(IEEE802.11b/g/n) use the same frequency,
On handling the unit
microwave interference may occur and resulting in
Do not leave the CD compartment open to avoid
communication speed deterioration, noise, or invalid
connection if the unit is used near a wireless LAN
device. In such a case, perform the following.
On cleaning the cabinet
Use the unit at least 10 m (33 feet) away from the
Clean the cabinet, panel and controls using a soft
wireless LAN device.
If the unit is used within 10 m (33 feet) of a
wireless LAN device, turn off the wireless LAN
device.
Use the BLUETOOTH device as close to the unit as
possible.
If you have any questions or problems concerning
your unit, consult your nearest Sony dealer.
Interference to other devices
Microwaves emitting from a BLUETOOTH device may
affect the operation of electronic medical devices.
Turn off the unit and other BLUETOOTH devices in
the following locations, as it may cause an accident.
where inflammable gas is present, in a hospital,
train, airplane, or a gas station
near automatic doors or a fire alarm
Notes
To be able to use the BLUETOOTH function, the
BLUETOOTH device to be connected requires the same
profile as the unit's.
Note also that even if the same profile exists, devices may
vary in function depending on their specifications.
Due to the characteristic of BLUETOOTH wireless
technology, the sound played on the unit is slightly
delayed from the sound played on the BLUETOOTH device
during listening to the music.
This unit supports security capabilities that comply with
the BLUETOOTH standard to provide a secure connection
when the BLUETOOTH wireless technology is used, but
security may not be enough depending on the setting. Be
careful when communicating using BLUETOOTH wireless
technology.
We do not take any responsibility for the leakage of
information during BLUETOOTH communication.
A device featuring the BLUETOOTH function is required to
conform to the BLUETOOTH standard specified by
Bluetooth SIG, and be authenticated. Even if the
connected device conforms to the above mentioned
BLUETOOTH standard, some devices may not be
connected or work correctly, depending on the features or
specifications of the device.
Noise or sound skips may occur depending on the
BLUETOOTH device connected with the unit, the
communication environment or the usage environment.
to the line
Troubleshooting
General
1
tracks)
The power does not turn on.
2
is finalized*
correctly.
Make sure the AC power cord is connected to the
wall outlet securely.
CD-DA is the abbreviation for Compact Disc Digital Audio.
Make sure the connector of AC power cord is
It is a recording standard used for audio CDs.
inserted into the AC IN jack securely.
Finalizing is the process to make the CD-R/CD-RW discs
playable on the consumer disc player products, and the
Check if the batteries are inserted correctly,
finalizing can be enabled or disabled as optional settings
matching the polarities.
during disc creation in most recording software.
Replace all the batteries with new ones when the
OPR/BATT indicator dims.
There is no sound.
CD format or formats conforming to ISO 9660
Make sure the appropriate function is selected for
Level 1/Level 2 or Joliet
the music or sound source you want to listen to.
Unplug the headphones when listening through
CD-RW with scratches or that is dirty, or CD-R/
speakers.
CD-RW recorded using an incompatible recording
device
The sound is noisy.
Is someone using a mobile phone or other
incorrectly
equipment emitting radio waves near the unit? If
so, move the unit and the BLUETOOTH device
away from such devices. Devices such as mobile
phones, etc., can affect BLUETOOTH
the disc is dirty. Wipe the disc from
communication.
the center out. If there are scratches,
dirt or fingerprints on the disc, a
CD/MP3/WMA player
tracking error may occur.
The CD player does not play even when a
benzine, thinner, commercially
CD is in place.
available cleaners or anti-static
Place the CD with the label side up.
spray intended for vinyl LPs.
Clean the CD.
Take out the CD and leave the CD compartment
sources such as hot air ducts, or leave it in a car
parked in direct sunlight as there can be a
open for about an hour to dry moisture
considerable rise in temperature inside the car.
condensation.
The CD-R/CD-RW is blank or unfinalized.
scratch the surface of the CD.
There are no playable MP3/WMA files on the disc.
There is a problem with the quality of the CD-R/
CD-RW, recording device or application software.
Replace all the batteries with new ones when the
OPR/BATT indicator dims.
mates DVD recorded material on one side with
digital audio material on the other side. However,
"NO CD" appears when the disc is loaded.
since the audio material side does not conform to
No disc is set in the CD compartment. Set a disc.
the Compact Disc (CD) standard, playback on this
The CD may have a reading problem. Replace the
product is not guaranteed.
disc.
The CD may be placed upside down. Place the
disc with the label side up.
An unplayable disc (BD, etc.) is loaded. Replace
the disc.
conform to the Compact Disc (CD) standard.
Recently, various music discs encoded with
"NO TRACK" flashes on the display when
copyright protection technologies are marketed
the disc is loaded.
by some record companies. Please be aware that
No audio files recorded in supported formats, or a
among those discs, there are some that do not
file to be played back has an unsupported file
conform to the CD standard and may not be
extension.
playable by this product.
"DISC ERR" appears when the disc is loaded.
The CD may be dirty. Clean the disc.
The CD may have scratches. Replace the disc.
harmful to eyes, do not attempt to disassemble
the casing. Refer servicing to qualified personnel
An unplayable disc (DVD, etc.) is loaded. Replace
only.
the disc.
The CD may have a reading problem. Replace the
unplug the unit, and have it checked by qualified
disc.
personnel before operating it any further.
A blank disc may be set in the CD compartment.
square, star) cannot be played on this unit.
The sound drops out.
Attempting to do so may damage the unit. Do not
Reduce the volume.
use such discs.
Clean the CD, or replace it if the CD is badly
damaged.
Place the unit in a location free from vibrations.
Clean the lens with a commercially available
do not use any other cord.
blower.
The sound may drop out or noise may be heard
be used for an extended period of time.
when using a poor quality CD-R/CD-RW or if there
is a problem with the recording device or
avoid damage that can be caused by battery
application software.
leakage or corrosion.
Starting playback takes more time than
usual.
The following discs take a longer time to start
sources, in a place subject to direct sunlight,
playback.
excessive dust or mechanical shock, or in a car
A disc recorded with a complicated tree
subject to the direct rays of the sun.
structure.
A disc that has many folders or non-MP3/WMA
surface.
files.
13
/
in) of
32
the rear of the cabinet. The ventilation openings
USB device
must be unobstructed for the unit to operate
properly and prolong the life of its components.
The USB device does not work properly.
If you connect an incompatible USB device, the
keep personal credit cards using magnetic coding
following problems may occur.
or spring-wound watches away from the unit to
The USB device is not recognized.
prevent possible damage from the magnet.
File or folder names are not displayed on this
unit.
Playback is not possible.
The sound skips.
warm location, or is placed in a very damp room,
There is noise.
moisture may condense on the lens inside the CD
The sound output is distorted.
player section. Should this occur, the unit will not
operate properly. In this case, remove the CD and
" OVER CURRENT " appears and the unit
wait about an hour for the moisture to evaporate.
turns off automatically.
An abnormal level has been detected in the
electrical current from the (USB) port
dust and debris contamination.
case, remove the USB device from the (USB) port
and reconnect the USB device, and then turn
on the unit again. If this problem persists after
turning on the power of the unit, contact your
cloth slightly moistened with a mild detergent
nearest Sony dealer.
solution. Do not use any type of abrasive pad,
There is no sound.
scouring powder, or solvent, such as alcohol or
benzine.
The USB device may be connected incorrectly.
Turn off the unit and reconnect the USB device.
Then turn on the unit.
There is noise, skipping, or distorted sound.
Turn off the unit and reconnect the USB device.
Then turn on the unit again.
The music data itself contains noise, or the sound
is distorted. Noise may have entered during the
creation of audio files. Try re-creating audio files
and use them to play on this unit.
The USB device cannot be connected to the
(USB) port
.
The connector on the USB device or the USB cable
is being inserted backwards. Insert it to the
(USB) port
in the correct direction.
" READING " is displayed for an extended
time, or it takes a long time before playback
starts.
The reading process can take a long time in the
following cases:
There are many folders or files on the USB
device.
The file structure is complex.
The memory is almost full.
The internal memory is fragmented.
To avoid the above problems, we recommend that
you adhere to the following guidelines:
Keep the total number of folders on a USB
device to 100 or less.
Keep the total number of files per folder to 100
or less.
Erroneous display
The data stored on the USB device may be
corrupted. Send the music data to the USB device
again.
This unit can display only numbers and letters of
the alphabet. Other characters will not be
displayed correctly.
"REC ERROR" appears.
An error occurred during transferring. Turn off the
unit and remove the USB device from the unit.
Then check the following:
Check the remaining storage space on the USB
device. If there is insufficient space for the
transferring, delete any unnecessary files or
folders.
Check that the data to be transferred is not
corrupted.
Check that the file format to be transferred is
compatible with the unit.
If the message still persists, contact your nearest
Sony dealer.
The USB device is not recognized.
Turn off the unit and reconnect the USB device,
then turn on the unit.
The USB device is not functioning properly. Refer
to the USB device operation manual for details on
how to deal with this problem.
Play does not start.
Turn off the unit and reconnect the USB device.
Play does not start from the first track.
Set the play mode to Normal Play.
MP3/WMA/AAC files cannot be played
Specifications
back.
The audio files may have inappropriate file
extensions. The file extensions supported by this
AUDIO POWER SPECIFICATIONS
unit are as follows:
POWER OUTPUT AND TOTAL HARMONIC DISTORTION
MP3: file extension ".mp3"
(The United States model only)
WMA: file extension ".wma"
With 6-ohm loads, both channels driven from 150 Hz
10,000 Hz; rated 1.5 W per channel-minimum RMS power,
AAC: file extension ".m4a," ".3gp" and ".mp4"
with no more than 10 % total harmonic distortion in AC
The audio files may have been created in formats
operation.
other than MP3/WMA/AAC formats.
CD player section
The USB storage device uses a file system other
System
than FAT16 or FAT32.*
Compact disc digital audio system
The files are encrypted or protected by passwords.
Laser diode properties
Emission duration: Continuous
Laser output: Less than 44.6 μW
* This unit supports FAT16 and FAT32, but some USB storage
media may not support both file systems.
(This output is the value measurement at a distance of
200 mm from the objective lens surface on the optical
For details, refer to the operation manual of the USB
pick-up block with 7 mm aperture.)
storage device in question or contact the manufacturer.
Number of channels
2
BLUETOOTH device
Frequency response
20 Hz 20,000 Hz +1/–2 dB
There is no sound.
Wow and flutter
Make sure that this unit is not too far from the
Below measurable limit
BLUETOOTH device (or smartphone), or that this
BLUETOOTH section
unit is not receiving interference from a wireless
Communication System
LAN, another 2.4 GHz wireless device, or a
BLUETOOTH Specification Version 2.1 + EDR
microwave oven.
Output
Check that the BLUETOOTH connection was
BLUETOOTH Specification Power Class 2
completed properly between this unit and the
Maximum communication range
BLUETOOTH device (or smartphone).
Line of sight approx. 10 m (33 feet)*
Frequency band
Perform pairing again (See "Pairing this unit with a
2.4 GHz band (2.4000 GHz 2.4835 GHz)
BLUETOOTH device").
Modulation method
Keep away from metal objects or surfaces.
FHSS
Make sure that the BLUETOOTH function is
Supported BLUETOOTH Profiles*
activated on the BLUETOOTH device (or
A2DP (Advanced Audio Distribution Profile)
smartphone).
AVRCP*
3
(Audio/Video Remote Control Profile)
Supported codec*
The sound skips or the correspondence
SBC (Subband Codec)
distance is short.
*
1
The actual range will vary depending on factors such as
obstacles between devices, magnetic fields around a
If a device that generates electromagnetic
microwave oven, static electricity, reception sensitivity,
radiation, such as a wireless LAN, other
aerial performance, operating system, application software,
BLUETOOTH device(s), or a microwave oven is
etc.
nearby, move away if possible. Or use the device
*
2
BLUETOOTH standard profiles provide the specifications for
BLUETOOTH communication between devices.
and the unit away from such sources.
*
3
Some operations may not be available depending on the
Remove any obstacle between this unit and the
device.
device or move the device and the unit away from
*
4
Codec: Audio signal compression and conversion format.
the obstacle.
Radio section
Locate this unit and the device as close to each
Frequency range
other as possible.
FM: 87.5 MHz 108 MHz (100 kHz step)
AM: 530 kHz 1,710 kHz (10 kHz step)
Re-position this unit.
Intermediate frequency
Try using the BLUETOOTH device or smartphone in
FM: 128 kHz
another position.
AM: 45 kHz
Antennas
A connection cannot be established.
FM: Telescopic antenna
Depending on the device to be connected, it may
AM: Built-in ferrite bar antenna
require some time to start communication.
Input
Perform pairing again (See "Pairing this unit with a
AUDIO IN
BLUETOOTH device").
Stereo mini jack
Check that the BLUETOOTH device is compatible
(USB) port
with this unit. For the latest information on
Type A, maximum current 500 mA, USB 2.0 Full Speed
compatible BLUETOOTH devices, check the
compatible
information on the website. The URL is listed
Output
under "Compatible BLUETOOTH devices."
(headphones) stereo mini jack
32
For 16
Pairing fails.
Supported audio formats
Bring the BLUETOOTH device closer to the unit.
Supported bit rates
Delete the model name of this unit from the
MP3 (MPEG 1 Audio Layer-3):
32 kbps 320 kbps, VBR
BLUETOOTH device and perform pairing again
WMA:
(See "Pairing this unit with a BLUETOOTH device").
48 kbps 192 kbps, VBR
Check that the BLUETOOTH device is compatible
AAC*:
8 kbps 320 kbps, VBR
with this unit. For the latest information on
* USB function only
compatible BLUETOOTH devices, check the
information on the website. The URL is listed
Sampling frequencies
MP3 (MPEG 1 Audio Layer-3):
under "Compatible BLUETOOTH devices."
32/44.1/48 kHz
WMA:
Pairing using the NFC function fails.
32/44.1/48 kHz
Try pairing manually (See "Pairing this unit with a
AAC*:
32/44.1/48 kHz
BLUETOOTH device"). Some NFC-compatible
* USB function only
smartphones may not be paired using the NFC
function of this unit, depending on the features or
General
specifications of the device.
Speaker
Relaunch "NFC Easy Connect" and move the
Full range, 8 cm (3
smartphone slowly over the N mark
.
Power output
2.0 W + 2.0 W (at 6
Check that the smartphone meets the
compatibility requirements (See "Compatible
Power requirements
120 V AC, 60 Hz (AC power supply)
smartphones").
9 V DC (6 LR14 (size C) batteries)
Power consumption
Radio
15 W
0.9 W (during standby mode)
The sound is weak or reception is poor.
Battery Life*
1,
Replace all the batteries with new ones.
Playback of CD
Approx. 9 hours
Move the unit away from nearby TVs.
Playback of USB device
For FM reception, extend the antenna to its full
Approx. 11 hours (at 100 mA load)
length, and reorient it for best FM reception. For
Approx. 3 hours (at 500 mA load)
FM reception
AM reception, reorient the unit itself to find the
Approx. 26 hours
best reception.
BLUETOOTH
If you are in a building, listen near a window.
Approx. 13 hours
If a mobile phone is placed close to the unit, a
*
1
Measured by Sony standards. The actual battery life
loud noise may be heard from the unit. Keep the
may vary depending on the circumstances of the unit
phone away from the unit.
or operating conditions.
*
2
When using Sony alkaline batteries.
The TV picture is unstable.
Dimensions
Approx. 320 mm × 133 mm × 215 mm (12
If you are listening to an FM program near a TV
8
1
/
in) (W/H/D) (incl. projecting parts)
2
with an indoor antenna, move the unit away from
Mass
the TV.
Approx. 2.3 kg (5 lb 1
Supplied accessories
After trying the suggested remedies, if the problem
AC power cord (1)
persists, unplug the AC power cord or remove all the
batteries. After all the indications on the display
Design and specifications are subject to change without
. In this
disappear, plug in the AC power cord again, or
notice.
re-insert the batteries. If the problem persists,
consult your nearest Sony dealer.
License and Trademark Notice
MPEG Layer-3 audio coding technology and
patents licensed from Fraunhofer IIS and
Thomson.
Windows Media is either a registered trademark
or trademark of Microsoft Corporation in the
United States and/or other countries.
This product is protected by certain intellectual
property rights of Microsoft Corporation. Use or
distribution of such technology outside of this
product is prohibited without a license from
Microsoft or an authorized Microsoft subsidiary.
The BLUETOOTH word mark and logos are owned
by the Bluetooth SIG, Inc. and any use of such
marks by Sony Corporation is under license.
The N Mark is a trademark or registered trademark
of NFC Forum, Inc. in the United States and in
other countries.
Android™ and Google Play™ are trademarks of
Google Inc.
Other trademarks and trade names are those of
their respective owners. In this manual, ™ and
marks are not specified.
For customers in the USA
1
Please register this product on line at the following
website.
http://www.sony.com/productregistration
2
Proper registration will enable us to send you
periodic mailings about new product, services and
other important announcements. Registering your
4
product will also allow us to contact you in the
unlikely event that the product needs adjustment or
modification. Thank you.
impedance headphones
1
/
in) dia., 6
, cone type (2)
4
, 10% harmonic distortion)
*
2
5
/
in × 5
1
/
in ×
8
4
1
/
oz) (incl. batteries)
8
®
Advertisement
