Asus TUWE-M 810E2 MICROATX MOTHERBOARD User Manual page 19

3. HARDWARE SETUP
3) USB/CNR Selection (CNRUSB1 / CNRUSB2)
This jumper switches the circuit power between the USB2 connector and the
CNR slot. Note that the default is set to power the USB2 connector.
Setting
Enable USB2
Enable CNR
®
TUWE-M
TUWE-M USB/CNR Selection
4) Keyboard Power Up (KBPWR)
This allows you to disable or enable the keyboard power up function. The jumper
is set to Enable. Pressing the <Spacebar> powers up the PC. This feature re-
quires an ATX power supply that can supply at least 300mA on the +5VSB lead.
Disable this jumber to stop power-up from the keyboard. NOTE: This jumper
must be set in conjunction with Wake On PS2 KB/PS2 Mouse/CIR in 4.5.1
Power Up Control.
Setting
Enable
Disable
®
TUWE-M
TUWE-M Keyboard Power Setting
CNRUSB1 / CNRUSB2
[1-2] (default)
[2-3]
CNRUSB1
CNRUSB2
KBPWR
[1-2] (default)
[2-3]
(default)
ASUS TUWE-M User's Manual
1 2
CNRUSB1
CNRUSB2
USB2 Connect
(default)
KBPWR
1 2 2 3
Enable Disable
2 3
CNR
19