DFI-ITOX G7V300-P User Manual page 34

2
Hardware Installation
Power-on Select
JP5 is used to select the method of powering on the system. If you
want the system to power-on whenever AC power comes in, set
JP5 pins 1 and 2 to On. If you want to use the power button, set
pins 2 and 3 to On.
34
Important:
If you want the system to automatically power-on when power
returns after an AC power failure, you must:
1. Set JP5 pins 1 and 2 to On.
2. The PWRON After PWR-Fail field must be set to "On".
(Integrated Peripherals submenu, Super I/O Device section
of the BIOS).
3 2 1
1-2 On:
Power-on via
JP5
AC power
3 2 1
2-3 On:
Power-on via
power button
(default)