On/Off Button - Garrett Pro-pointer II Owner's Manual









FEATURES
 ON/OFF Button
 Pinpointing Tip
 360° Side-Scan Area
 Exclusive Scraping Blade
 LED Flashlight
 Speaker
 Lanyard Attachment Loop
 Sealed Battery Cover
Powering On
Press and release the button () while holding the detector away from any
metallic objects. You will hear 2 beeps and the LED () will remain on.
Powering Off
Press and release the button to power off. The unit emits a single beep during
its power down.
LED Light
The white LED will remain illuminated while the unit is on, providing power-
on indication and acting as a flashlight when needed.
Lost Pinpointer Alarm
After 5 minutes of being ON without a button press, the Pro-Pointer II will
begin emitting progressively faster warning chirps for 60 minutes. Press the
power button off and back on to reset.
Auto-Off Feature
After one hour of warning chirps, the Pro-Pointer II will power off automatically.
Scraping Blade
This rugged edge is ideal for sifting through dirt while searching for the target.
The Pro-Pointer II's 360º-side-scan detection allows the detector to alarm
when the unit is passed in close proximity to a metallic target.
2
3