Sanyo VCC-HD4000P Service Manual page 9

3-6. Adjust Specifications
1. Timer Quartz Adjustment
Preparation:
Temperature : 25 ± 5 °C
Start to adjust after one minute from turn on the power.
Adjustment method:
1. Connect the frequency counter to the TP301.
2. Adjust the trimmer (CT301) so that the adjustment
values becomes standard values.
Standard values : 2.048035 KHz - 2.048049KHz
2. Lens Adjustment
Camera
Preparation:
POWER switch: ON
If using a ready-made collimator, set to infinity.
Note:
Do not vibrate during the adjustment.
If readjusting after it has already been adjusted, wait for 15
minutes or more for the unit to cool down first.
Adjustment method:
1. Set the camera 0 cm from the collimator. (Do not enter any
light.)
2. Set the camera so that it becomes center of the screen in
the collimator.
3. Device mode of the camera is carried out and it connects
with a personal computer by the USB cable.
4. Double-click on the DscCalDi.exe.
5. Click the "QrCode".
6. QrCode Input Dialog display will be displayed.
Collimator
7. Deselect Bar code Input.
8. Enter the alphanumeric characters which are underneath
the bar code which is included with the lens.
9. Click the Execute.
10. Status: Production adjustment end! will be displayed, and
click the OK.
11. Select "Infinity Cal." on the LCD "Test", and click the "Yes".
12. Lens infinity adjustment value will appear on the screen.
13. Click the OK.
14. Device mode is canceled.
Dsc Calibration
Infinity calibration :
AF_I_WIDE: 9
AF_I_MID1: 11
AF_I_MID2: 15
AF_I_MID3: 18
AF_I_MID4: 13
AF_I_MID5: 7
AF_I_MID6: -2
AF_I_TELE: -7
QR_Z_WIDE: -87
QR_F_I_WIDE: 111
QR_F_I_TELE: -317
QR_Z_AORI: -87
QR_F_I_AORI: 111
Adjustment value determination is effectuated using below val-
ues.
The adjustment values fulfill the conditions below, they are
determined as within specifications.
Adjustment value determination
AF_I_WIDE: ZIW
ZIW: infinity adjustment value of focus at zoom position
wide (-126<=ZIW<=110)
AF_I_MID1: ZIM1
ZIM1: infinity adjustment value of focus at zoom position
middle1 (-138<=ZIM1<=121)
AF_I_MID2: ZIM2
ZIM2: infinity adjustment value of focus at zoom position
middle2 (-132<=ZIM2<=114)
AF_I_MID3: ZIM3
ZIM3: infinity adjustment value of focus at zoom position
middle3 (-128<=ZIM3<=109)
- -
9
x
OK
Copy