Sanyo VCC-HD4000P Service Manual page 14

3-9. Firmware uploading procedure
1. Overwriting firmware from the SD card
Preparation:
SD card: SD card with firmware rewritten into the root direc-
tory
Data: CL2xxxxx.BIN (xxxxx: version)
Overwriting method:
1. Insert the above SD card.
2. Turn on the camera.
3. Set the REC/PLAY switch to the PLAY.
4. Press the MENU button.
5. Choose the Option menu.
6. Choose the FORMAT.
7. Toggle the SET button to the left for 2 seconds. FIRM WARE
UPDATE will display.
8. Choose YES.
9. Press the SET button. Update is starting.
Note:
Do not turn off the camera's power or remove the SD card
while the firmware is being updated.
The power will turn on automatically after the update is com-
plete.
2. Overwriting firmware from the calibration software
Preparation:
PC with overwriting firmware copied to the preferred folder in
the HD.
Data: CL2xxxxx.BIN (xxxxx: version)
Overwriting method:
1. Device mode of the camera is carried out and it connects
with a personal computer by the USB cable.
2. Double-click on the DscCalDi.exe.
3. Click the Firmware.
4. Choose the fimware file to use for overwriting, and click
the Yes.
5. Update is starting. The message will appear, and choose
OK.
6. After the update is complete, disconnect the USB cable
and turn the camera's power off.
Note:
Do not turn off the camera's power while the firmware is be-
ing updated.
- -
14