Firefly cygnus hpg User Manual page 11

1. Mode Selector- Allows switching between the three power routing
modes and off
2. Emergency Stop- Press in to immediately halt all operation
3. Auxiliary connections (Generator start)- Provides signals for various
applications including the control of a Gen. Set.
4. Solar Array Isolator Switches
Solar Array inputs. Switch off to isolate the Solar Array circuit, on to
enable it.
5. Solar Array Inputs
6. Bus Bar Connection- Provides entry for hard wired AC input and output
connections.
7. RCC 03- Provides status and control of the unit's inverters and charge
controller
§
8. Single Phase AC Input Protection- over current MCB
9. Single Phase AC Input Connector- 230 V AC single phase 63 A CEE
Form plug
10. Single Phase AC Input Indicator- indicates presence of AC at input
connection
11. Three Phase AC Input Indicators- indicates presence of AC on each line
of the input connection
12. Three Phase AC Input Connector- 230 V AC three phase 63 A CEE Form
plug
13. Three Phase AC Input Protection- over current MCB
14. Single Phase AC Output Connector- 230 V AC single phase 63 A CEE
Form socket
15. Single Phase AC Output Indicator- indicates presence of AC at output
connection
16. Single Phase AC Output Protection- RCD earth leakage and MCB over
current
17. Three Phase AC Output Protection- RCD earth leakage and MCB over
current
18. Three Phase AC Output Indicator- indicates presence of AC on each
line of the output connection
19. Three Phase AC Output Connector - 230 V AC three phase 63 A CEE
Form socket
Solar inputs and charge controller only available on models with Solar Prep option
§
- Provides overload protection for the
§
- 30 A MC3 connections for solar arrays
§
CYGHPG12-24-User-Manual-v1.6.indd Page 11