Troubleshooting Guide; Specifications - Memorex MT1120A Owner's Manual

20" mts stereo color television
Table of Contents

Advertisement

TROUBLESHOOTING GUIDE

Before requesting service, please refer to the following chart for the symptom and possible solution.
SYMPTOMS
POSSIBLE SOLUTIONS
• Make sure the power cord is plugged in.
TV does not
• Try another AC outlet.
operate
• Power is off, check fuse or circuit breaker.
• Unplug unit for an hour, then plug it back in.
• Station or CATV experiencing problems, tune
Poor sound
to another station.
or No sound
• Check sound adjustments (Volume and
Muting).
• Check for sources of possible interference.
• Station or CATV experiencing problems, tune
to another station.
Poor picture
• Check antenna or CATV connections, reorient
or No picture
antenna.
• Check for sources of possible interference.
• Check picture control adjustments.
• Station or CATV experiencing problems, tune
to another station.
Poor recep-
• Station signal is weak, reorient antenna to
tion on some
receive weaker station.
channels
• Check for sources of possible interference.
• Station or CATV experiencing problems, tune
to another station.
• Make sure channels are set into memory.
Poor color or
• Check picture control adjustments.
no color
• Check antenna or CATV connections, reorient
antenna.
• Check for sources of possible interference.
• Station or CATV experiencing problems, tune
Picture
to another station.
wobbles
• Make sure channels are set into memory.
or drifts
• CATV company is scrambling signal.
• Check antenna orientation.

SPECIFICATIONS

AC Power Input:
AC Power Consumption:
Chassis Construction:
Picture Tube:
Audio Power Output Rating:
Speaker:
6-1/3" x 2-1/4" Full Range, 32 ohm x 2
Tuner Type:
181 Channel, Quartz PLL Frequency Synthesized
Remote Control:
2 x AAA batteries (not included)
ACCESSORY:
Remote Control
3G81501A E
120 V, 60 Hz
Receiving Channels:
95W
IC Solid state
20" (measured diagonally)
2.5 + 2.5 W
Antenna Input Impedance:
Dimensions:
Weight:
11
SYMPTOMS
POSSIBLE SOLUTIONS
• Check all CATV connections.
No CATV
• Set TV/CATV menu option to the CATV mode.
reception
• Station or CATV system problems, try another
station.
Horizontal or
• Check antenna connections, reorient antenna.
• Check for sources of possible interference.
diagonal bars
on screen
• Make sure TV/CATV menu option is in the
No reception
above
appropriate mode.
• If using antenna, check UHF antenna
channel 13
connections.
• Batteries are weak, dead or inserted
incorrectly.
No Remote
• Remote is out of range, move closer to TV
operation
within 15 feet.
• Make sure Remote is aimed at sensor.
• Confirm there are no obstructions between the
Remote and the TV.
• Make sure the power cord is plugged in.
• No broadcast on station tuned.
TV shuts off
• Sleep Timer is set.
• Power interrupted.
• TV station experiencing problems or program
Closed -
tuned is not closed captioned. Try another
Caption is
channel.
not activated.
• Check CATV connection or VHF/UHF antenna,
reposition or rotate antenna.
• Press TV/CAPTION/TEXT button to turn on
the closed caption decoder.
Display is not
• Select proper language in the menu options.
shown in your
language.
VHF
UHF
CATV
23-5/8" (W) x 17-9/16" (H) x 18-7/8" (D)
12/8/99, 10:12 AM
2-13
14-69
01-97 (5A)-(A-3)
98-99 (A-2)-(A-1)
14-22 (A)-(I)
23-36 (J)-(W)
37-65 (AA)-(FFF)
66-125 (GGG)-(125)
75 ohm (VHF/UHF/CATV)
Coaxial Input
46.3 Ibs
11

Advertisement

Table of Contents
loading

Table of Contents