ATEN KN1108V User Manual page 80

KVM Over the NET™ User Manual
3. Click Record.
The dialog box disappears, and a small panel appears at the top left of the
screen:
4. Press the keys for the macro.
To pause macro recording, click Pause. To resume, click Pause again.
Clicking Show brings up a dialog box that lists each keystroke that you
make, together with the amount of time each one takes (see page 64).
Case is not considered – typing A or a has the same effect.
When recording the macro the focus must be on the remote screen. It
cannot be in the macro dialog box.
Only the default keyboard characters may be used. Alternate characters
cannot be used. For example, if the keyboard is Traditional Chinese
and default character is A the alternate Chinese character obtained via
keyboard switching is not recorded.
5. If you haven't brought up the Show dialog, click Done when you have
finished recording your macro. You return to the Macros dialog box with
your system macro key presses displayed in the Macro column:
6. If you want to change any of the keystrokes, select the macro and click
Edit. This brings up a dialog box similar to the one for Show. You can
change the content of your keystrokes, change their order, etc.
7. Repeat the procedure for any other macros you wish to create.
64