Quick Setting Toolbar In Live View Mode - Hills NVR-CH16 User Manual

User Manual of Network Video Recorder - User Manual
Name
Output Mode
Note:

The dwell time of the live view configuration must be set before using Start Auto-switch.

If the corresponding camera supports intelligent function, the Reboot Intelligence option is included when
right-clicking mouse on this camera.

3.2.3 Quick Setting Toolbar in Live View Mode

On the screen of each channel, there is a quick setting toolbar which shows when you single click the mouse in the
corresponding screen.
Table 3. 4 Description of Quick Setting Toolbar Icons
Icon Description
Enable/Disable
/
Manual Record
PTZ Control
Live View
Strategy
Instant Playback only shows the record in last five minutes. If no record is found, it means there is no record
during the last five minutes.
Digital Zoom can zoom in the selected area to the full screen. You can left-click and draw to select the area
to zoom in, as shown in Figure 3. 3.
Description
Four modes of output supported, including Standard, Bright, Gentle and Vivid.
Figure 3. 1 Right-click Menu
Figure 3. 2 Quick Setting Toolbar
Icon
Instant Playback
38
Description Icon
/
Digital Zoom
Close
Description
Mute/Audio on
Image Settings