Managing Hdd Group; Setting Hdd Groups; Setting Hdd Property - Hills NVR-CH16 User Manual

User Manual of Network Video Recorder - User Manual
NetHDD will be displayed in the list.
Note:
If the added NetHDD is uninitialized, please select it and click the Init button for initialization.

9.3 Managing HDD Group

9.3.1 Setting HDD Groups

Purpose:
Multiple HDDs can be managed in groups. Video from specified channels can be recorded onto a particular HDD
group through HDD settings.
Steps:
1. Enter the Storage Mode interface.
Menu > HDD > Advanced
2. Set the Mode to Group, as shown in Figure 9. 5.
3. Click the Apply button and the following Attention box will pop up.
4. Click the Yes button to reboot the device to activate the changes.
5. After reboot of device, enter the HDD Information interface.
Menu > HDD> General
6. Select HDD from the list and click
7. Select the Group number for the current HDD.
Note:
The default group No. for each HDD is 1.
8. Click the OK button to confirm the settings.
9. In the pop-up Attention box, click the Yes button to finish the settings.

9.3.2 Setting HDD Property

Purpose:
Figure 9. 5 Storage Mode Interface
Figure 9. 6 Attention for Reboot
icon to enter the Local HDD Settings interface.
121