Upgrading System; Upgrading By Local Backup Device - Hills NVR-CH16 User Manual

User Manual of Network Video Recorder - User Manual

11.5 Upgrading System

Purpose:
The firmware on your NVR can be upgraded by local backup device or remote FTP server.

11.5.1 Upgrading by Local Backup Device

Steps:
1. Connect your NVR with a local backup device where the update firmware file is located.
2. Enter the Upgrade interface.
Menu >Maintenance>Upgrade
3. Click the Local Upgrade tab to enter the local upgrade menu, as shown below.
4. Select the update file from the backup device.
5. Click the Upgrade button to start upgrading.
6. After the upgrading is complete, reboot the NVR to activate the new firmware.
Figure 11. 12 Local Upgrade Interface
140