Network Settings - Visual Tools AX-TV User Manual

3.3 Network settings

You need to configure the network parameters to connect to the cameras. Choose the connection You need to configure the network parameters to connect to the cameras. Choose the connection You need to configure the network parameters to connect to the cameras. Choose the connection
you prefer, either Ethernet or WIFI, and make sure that the corresponding checkbox is selected or
the communications will not be active. the communications will not be active.

Ethernet Settings
Menu >> Settings >> Network settings >> Ethernet settings >> Settings >> Network settings >> Ethernet settings
Connect the local network cable. The DHCP protocol automatically configures the network Connect the local network cable. The DHCP protocol automatically configures the network Connect the local network cable. The DHCP protocol automatically configures the network
parameters. If you want to edit the network parameters select the Ethernet settings parameters. If you want to edit the network parameters select the
edit the parameters you need. edit the parameters you need.
Note: the MAC address that appears in the lower part of the unit corresponds to the Ethernet
connection.

Wi-Fi Settings
Menu >> Settings >> Network settings >> WIFI settings Menu >> Settings >> Network settings >> WIFI settings
Select the WIFI network and enter the c WIFI network and enter the corresponding password. When the connection is active
you will see a Connected label under the selected name's network.
User Manual - 6
WIFI, and make sure that the corresponding checkbox is selected or WIFI, and make sure that the corresponding checkbox is selected or
that appears in the lower part of the unit corresponds to the Ethernet that appears in the lower part of the unit corresponds to the Ethernet
orresponding password. When the connection is active
label under the selected name's network.
Ethernet settings option and