Factory Image - Visual Tools AX-TV User Manual

6. – Connect the power supply again, holding the upgrade button pressed for a few more
seconds. The screen will show a menu with several options.
7. - Select with the remote control buttons the 'Apply Update' option and confirm with [OK].
8. - In the following menu choose the 'Udisc' option and select the .IMG file with the upgrade you
want to apply. Press the [OK] button to run the upgrade.
9.- When the upgrade is loaded a new menu appears on screen. Restart the unit by selecting the
'Reboot System Now' option and press [OK].The unit reboots, check on your TV that the AX-TV
starts properly.

5.2 Factory image

The unit has a complete software image of the date it was manufactured.
The procedure is similar to the upgrading but you don't need to use a USB memory or download the
upgrade.
1. - The AX-TV has to be connected to the TV/monitor to follow this process.
2. – Remove the AX-TV power supply. Turn the AX-TV upside down and press with a sharp object
the firmware upgrade button marked "upgrade" on the case.
3. – Connect the power supply again, holding the upgrade button pressed for a few more
seconds. The screen will show a menu with several options.
4. - Select with the remote control buttons the Apply Update option and confirm with [OK].
5. - In the following menu choose the media option and select the default_recovery.IMG file.
Press the [OK] button to run the factory image.
6.- When the image is loaded a new menu appears on screen. Restart the unit by selecting the
Reboot System Now option and press [OK].The unit reboots, check on your TV that the AX-TV
starts properly.
For any questions or concerns about this process please contact the support department:
support@visual-tools.com.
User Manual - 16