Brookstone BIG BLUE UNPLUGGED User Manual page 15

TROUBLESHOOTING
ISSUE
Can not put speakers
into Pair2 mode
(continued).
Can not switch
speakers between
stereo or left/right in
Pair2 mode.
26
(CONTINUED)
SOLUTION
The Pair2 LED INDICATOR will turn off
after 5 seconds of no buttons pressed.
If the Pair2 LED INDICATOR is off,
press the Pair2 BUTTON once on the
Main speaker to activate the Pair2
LED INDICATOR then press the Pair2
BUTTON on the Main speaker again
to activate Pair2 search mode.
Confirm you are pressing and holding
the Pair2 BUTTON on the Main
speaker or the Auxiliary speaker until
the Pair2 stereo or left and right tones
sound on each speaker.
TROUBLESHOOTING
(CONTINUED)
ISSUE SOLUTION
Can not switch The Pair2 LED INDICATOR will turn
speakers between
off after 5 seconds of no buttons
stereo or left/right in
pressed. If the Pair2 LED INDICATOR
Pair2 mode (continued).
is off, press the Pair2 BUTTON once
to activate the Pair2 LED INDICATOR
and then press and hold the Pair2
BUTTON on the Main speaker or the
Auxiliary speaker until the Pair2 stereo
or left and right tones sound on each
speaker.
The LED RING can only be turned off if
Can not turn off LED
there is a device paired with the speaker.
Ring.
See page 11 for pairing instructions.
27