Using Pair2 For Stereo Or Left/Right Sound - Brookstone BIG BLUE UNPLUGGED User Manual

USING Pair2 FOR STEREO OR LEFT/RIGHT
SOUND
Two Big Blue Unplugged™ speakers can be paired for stereo
or left/right sound. Identify which speaker will be the Main
speaker and which speaker will be the Auxiliary speaker as
your device only needs to pair with the Main speaker.
1. Pair your device (see page 11) with the Main speaker.
2. Press the POWER/PAIRING BUTTON on the
Auxiliary speaker until the LED RING turns
on and the power on tone sounds.
Note: Do not put the Auxiliary speaker into device pairing
mode.
3. Press the Pair2 BUTTON on the Main speaker (the
speaker that is paired with your device). The Pair2 LED
INDICATOR will start flashing and audio will pause on
the Main speaker. The Main speaker will wait for a Pair2
connection for up to 2 minutes.
4. Press and hold the Pair2 BUTTON on the Auxiliary
speaker until the Pair2 LED INDICATOR starts flashing
16
on the Auxiliary speaker.
5. Release the Pair2 BUTTON on the Auxiliary speaker.
6. After a few seconds, the Pair2 LED INDICATORS on
both the Main Speaker and the Auxiliary speaker will be
solid, the Pair2 stereo tone will sound on each speaker,
and the speakers will be in stereo mode.
7. Press the PLAY/PAUSE BUTTON on either speaker to
resume audio.
8. To put the speakers in left/right mode, press and hold the
Pair2 BUTTON on the Main speaker or the Auxiliary
speaker until the Pair2 left and right tones sound on each
speaker. To put the speakers back into stereo mode, press
and hold the Pair2 BUTTON on the Main speaker
or the Auxiliary speaker until the Pair2 stereo tones sound
on each speaker.
9. To exit out of Pair2 stereo or left/right modes, power
either speaker off by pressing the POWER BUTTON.
Notes:
• To cancel Pair2 pairing mode, either press the POWER/
17