Optional Accessories; Gps Antenna Options - Garmin GPS 400W Installation Manual

3.2

Optional Accessories

3.2.1

GPS Antenna Options

For details regarding antenna selection, refer to Section 1.4.8. Once the antenna type is decided upon,
refer to the information below for detailed parts information for antennas available directly from Garmin.
Contact manufacturer directly for information on other antennas. Installation information for the antennas
can be found in the appropriate installation manual listed in Section 3.5.
Kits for the GA 56A, GA 56W, GA 57, A33, and A34 antennas are no longer available.
GA 35 Antenna:
GA 35 Antenna Garmin P/N 013-00235-00 contains the following items:
ITEM
GA 35 GPS/WAAS Antenna [1]
[1] Antenna includes 8-32 UNC-2A x 1.00" SS 303 mounting screws (qty 4) and O-ring (qty 1).
An antenna doubler may also be required. Refer to Section 3.2.2 below for additional information.
To secure the antenna #8 washers (qty 4) and #8 (qty 4) self-locking nuts are required in addition to
the antenna, or suitable nutplates may be installed on the doubler.
To connect the GPS antenna coaxial cable to the antenna a TNC plug is required.
GA 36 Antenna:
GA 36 Antenna Garmin P/N 013-00244-00 contains the following items:
ITEM
GA 36 GPS/WAAS Antenna [1]
[1] Antenna includes 8-32 UNC-2A x 1.00" SS 303 mounting screws (qty 4) and O-ring (qty 1).
An antenna doubler may also be required. Refer to Section 3.2.2 below for additional information.
To secure the antenna #8 washers (qty 4) and #8 (qty 4) self-locking nuts are required in addition to
the antenna, or suitable nutplates may be installed on the doubler.
To connect the GPS antenna coaxial cable to the antenna a TNC plug is required.
GA 37 Antenna:
GA 37 Antenna Garmin P/N 013-00245-00 contains the following items:
ITEM
GA 37 GPS/WAAS + XM Antenna [1]
[1] Antenna includes 8-32 UNC-2A x 1.00" SS 303 mounting screws (qty 4) and O-ring (qty 1).
An antenna doubler may also be required. Refer to Section 3.2.2 below for additional information.
To secure the antenna #8 washers (qty 4) and #8 (qty 4) self-locking nuts are required in addition to
the antenna, or suitable nutplates may be installed on the doubler.
To connect the GPS antenna coaxial cable to the antenna a TNC plug is required.
Page 3-2
Rev. G
NOTE
PART NUMBER
013-00235-00 (Garmin)
AT575-93G (Aero Antenna)
PART NUMBER
013-00244-00 (Garmin)
AT575-126G (Aero Antenna)
PART NUMBER
013-00245-00 (Garmin)
AT2300-126G (Aero
Antenna)
QTY
1
QTY
1
QTY
1
400W Series Installation Manual
190-00356-02