Garmin GPS 400W Installation Manual page 4

Page
Revision
Number(s)
i
1-18
3-12
4-13
5-4
5-7
G
5-15
5-22
5-41
6-6
H-51
H-55
Page B
Rev. G
CURRENT REVISION DESCRIPTION
Section
Number
TOC Changed software version from 3.10 to 3.20
1.9 Updated contact phone number for Garmin (Europe) Ltd.
3.13.1 Corrected formatting of Table 3-7.
Added note to indicate that additional output settings may be available
4.6.1.2
on unit installed via OEM TC.
Added note to indicate that additional output settings may be available
5.3.1
on unit installed via OEM TC.
Added ADS-B OUT to Channel Outputs table. Also added note [4] to
5.3.1 indicate the ADS-B OUT is only available with main software version
3.20 or later.
5.3.11 Added table with information for V-Flag State
Added note to explain steps that need to be taken to display an
5.3.20
alternate traffic color.
Checkout Log Added V-Flag State to Main CDI/OBS Configuration section.
Added 'check GPS Antenna' to the Alert Text 'GPS is not responding'
6.2
in Table 6-2.
Updated Figure H-32 to include note that the ILS/GPS approach
Appendix H discrete is required by some CDIs/HSIs that are used with the M4C/D
Autopilots.
Updated Figure H-35 to include note that the low level flags or
Appendix H
superflags can be connected, but not both.
DOCUMENT PAGINATION
Section
Table of Contents
Section 1
Section 2
Section 3
Section 4
Section 5
Section 6
Section 7
Section 8
Appendix A
Appendix B
Appendix C
Appendix D
Appendix E
Appendix F
Appendix G
Appendix H
Description of Change
Pagination
i – viii
1-1 through 1-18
2-1 through 2-14
3-1 through 3-14
4-1 through 4-22
5-1 through 5-44
6-1 through 6-10
7-1 through 7-4
8-1 through 8-2
A-1 through A-2
B-1 through B-2
C-1 through C-2
D-1 through D-4
E-1 through E-6
F-1 through F-8
G-1 through G-8
H-1 through H-58
400W Series Installation Manual
190-00356-02