Table of Contents
Advertisement
Upgrade System Software
MediaPOINTE's Development Team is constantly striving
to refine and upgrade features on the HD Portal plus
to lead technological advances in the archiving and
streaming marketplace.
In order to keep the HD Portal plus up to date with
all of the latest features, you may want to update
the system software from time to time. Follow the
following steps to upgrade the HD Portal plus software.
.
1
Contact your MediaPOINTE dealer for the latest
software version and have the upgrade fee sent to
you. This file will have an *.mpup extension. The
downloaded file must be placed on the same PC that is
used to browse the web portal.
2. Go to the Software Management section of the main
menu and click on the browse button to search for the
downloaded *.mpup file. Locate the file and specify the
path to the file as shown in the window.
3. Select the Upgrade button to begin the upgrade.
Be sure to wait until the upgrade is complete before
proceeding.
4. If your HD Portal plus doesn't automatically reboot,
manually do this by selecting the Reboot button in the
info section. This will reboot the unit and the new
software will be in place.
Disabling and enabling multicast
By default the HD Portal plus will unicast anytime a
profile is initiated with streaming enabled. Unicast can
be disabled or multicast enabled. To do this, choose the
Software Management tab of the Network GUI. There
you can enable or disable multicast or unicast.
Reset Configuration
Selecting the Reset Configuration button on the
Software Management page will reset all HD Portal plus
passwords and network settings to factory default. This
will not delete any of your recorded files.
System Info
The System Info section gives the user important
information about the HD Portal plus. The system can
be rebooted from this page of the Web Portal. See the
table below for more details.
| HD
Portal plus User Manual Version 1.5 July, 2015
Setting
Product Name
Model
Software Version
Build Number
Serial Number
Manufacturer
Copyright
Available disk
space
Options
Shutdown
Select the Shutdown button on the Software
Management page to remotely power-down (shut off)
the HD Portal plus. Any access to the unit will be lost
as the unit is powered down. In order to power up the
unit, the user must physically push the power switch
on the front of the unit. No communication is possible
with the HD Portal plus when it is powered down.
SYSTEM INFORMATION
Description
HD Portal plus
Product Series Number
The installed Version number of
current software
Software Build Number
The HD Portal plus Serial Number
Name of the Company that
manufactured HD Portal plus
Copyright date of HD Portal plus
The amount of disk space still available
for content recording
Future optional features will be listed
here
17
Advertisement
Table of Contents
