Table of Contents
Advertisement
Author Login Security
The Administrator needs to enable the security login
for author. Checking the Enable Author Security box
will enable the author password. Enter an author
password in the author password field then reenter
the new password in the confirm password field and
click the Update button.
Unchecking the Enable Author Security check box
deactivates the author login password. Press Update
to confirm the change.
Note that the Login ID and the password are case
sensitive.
User Login Security
By default, a login password for the user is disabled.
Checking Enable User Security will enable the User
password. Enter a user password in the User Password
field, then reenter the same password in the Confirm
User Password field and click the Update button.
Setting Date & Time
When content is recorded using the HD Portal plus it
is given a time and date stamp. The time and date
stamp can be set in the Date & Time section of the
main menu. The date can be selected from the pop-up
calendar. The Time Zone can be selected from the
drop down menu. Current time can be selected from
the drop down menu. Confirm any changes by clicking
on the Submit button.
If desired, the NTP (Network Time Protocol) feature
can be enabled to synchronize the clock of the HD
Portal plus to an NTP server; click on the "Enable
NTP" box and enter the server information, then click
on Submit.
IP Settings
System Name
The factory set system name is MediaPOINTE. You
can change the name in the IP setting menu page by
entering a new name in the text field. A reboot is
required for the new name to take effect. The name
can be up to 15 characters long and consist of alpha-
numeric characters. No special characters or symbols
will be accepted except for a hyphen.
| HD
Portal plus User Manual Version 1.5 July, 2015
NETWORK CONFIGURATION
Setting
Enable DHCP settings for automatic address
retrieval from DHCP Server. Disabling the
DHCP
DHCP client will require a static IP address
Client
(with subnet mask and default gateway) to be
entered.
Assign a static IP address to HD Portal plus. This
IP
field will also display the currently assigned IP
Address
address
IP
Assign subnet mask to HD Portal plus. This field
Subnet
will also display the currently assigned subnet
Mask
mask
Assign a default gateway to the HD Portal
Default
plus. This field will also display the currently
gateway
assigned default gateway
If the network supports DNS, enter the DNS
DNS
Server IP address(es) here. This field will also
server
display the currently assigned default gateway
The System Name and all network settings can be set
in the IP Settings section of the main menu. Network
settings may also be configured via USB memory stick
configuration.
NOTE: To change the default IP settings of the HD Portal
plus or any of the other configuration settings, you must
log in with administrator rights as (admin).
To quickly find the system's IP Address, connect a local
monitor to the VGA or HDMI output. Use the InfraRed
remote to navigate to the System Info page of the on
screen menu.
IP addresses may be assigned to the HD Portal plus in
two ways: DHCP and Fixed (Static) IP. If your network
is configured for DHCP, the IP address will be provided
automatically and will be visible on the local output
of the HD Portal plus. To set the IP address, follow the
procedure on the next page.
Description
6
Advertisement
Table of Contents
