Table of Contents
Advertisement
Modifying (Edit) a Profile
Modifying a profile is very similar to copying one. Use
the screen capture on the right as a guide to set pa-
rameters. Modify each section with the information you
want in that profile as outlined in the steps below. By
checking the Icons on the Edit profiles web page.
1.
Profile name - The name of the profile you are
editing.
2.
Auto start- The drop down provides two choices:
OFF and ON. Select OFF for standard control.
Select ON for standard control and automatic video
conference record with specified codec
3.
Format - The drop down provides six choices: PC,
iPod,WMV, DIVX, AAC audio only and WMV audio
only. Selecting PC provides standard H.264 with
selectable frame sizes. Selecting iPod sets lower
resolution frame size. Selecting AAC audio only or
WMV audio only selects no video, audio only.
4.
Main Source - The drop down provides three
choices: DVI, Composite and Custom Multiple
Source Template. Selecting DVI sets the DVI
as input with frame size selection. Selecting
Composite sets the Composite (RCA) video input as
input with frame size selection. Custom Multiple
Source Template brings up a allows you to select
from a variety of available layouts. See Page 15
5.
Layout - The Layout button allows you to choose
one of many screen layouts as shown on Page15.
6.
Frame Size (if allowed) - The drop down provides
five choices: QVGA - 320 x 240; VGA - 640 x 480;
SVGA - 800 x 600; XGA - 1024 x 768; 720p -1280 x
720. Choose desired frame size.
7.
Frame rate - Enter the selected frame rate with a
maximum of 30 fps.
8.
Bitrate - Enter the bitrate desired with a range
from 128 kbps to 5120 kbps
9.
Audio format - The drop down provides three
choices: Disabled for no audio; Mono (64 kbs) for 1
channel mono source; Mono (32 kbs) for 1 channel
mono source at a lower bitrate.
10. Archive folder - The location where the files are
saved on the local machine.
11. Archive prefix - The beginning of the file name
saved. A maximum of ten characters is allowed
with no spaces or special characters.
| HD
Portal plus User Manual Version 1.5 July, 2015
1
2
3
Streaming and/or Recording
4
6
7
8
9
10
11
12
13
14
12. Enable FTP upload - Check if you want to send the
files to an FTP server after recording. If you check
this another menu will appear.
FTP user name: Enter registered user of
the FTP server
FTP user password: Enter Password of the FTP
server user
FTP upload directory: Enter the path to where
the file(s) will be stored on the FTP server
Delete: Check this box if you want to delete
local media after upload.
13. Video transcoding - Makes a copy of the record-
ed file in the selected format. This provides four
checkbox choices: Windows, H.264, Flash and iPod.
Check the format you want.
14. Enable titles and credits - Select if you want to
insert a JPEG image at the beginning and end of
a recording. You must upload images first in the
Titles & Credits section of the main menu.
15. Submit or Cancel - Click Submit if you want to save
this profile. Click Cancel if you want to reject
15
14
Advertisement
Table of Contents
