Table of Contents
Advertisement
Creating (Copy) a Profile
Next, using the screen capture on the right as a guide
set parameters. Fill in each section with the informa-
tion you want in that profile as outlined in the steps
below. By checking the Icons on the Copy profiles web
page you can have streaming only, recording only or
streaming/recording simultaneously.
1.
Profile name - Enter any name up to 30 characters.
It cannot contain special characters. This will
appear as a new profile on the Edit Profiles page
after you press Submit. The name should be
unique.
2.
Auto start- The drop down provides two choices:
OFF and ON. Select OFF for standard control.
Select ON for standard control and automatic video
conference record with specified codec
3.
Format - The drop down provides six choices: PC,
iPod,WMV, DIVX, AAC audio only and WMV audio
only. Selecting PC provides standard H.264 with
selectable frame sizes. Selecting iPod sets lower
resolution frame size. Selecting AAC audio only or
WMV audio only selects no video, audio only.
4.
Main Source - The drop down provides three
choices: DVI, Composite and Custom Multiple
Source Template. Selecting DVI sets the DVI
as input with frame size selection. Selecting
Composite sets the Composite (RCA) video input as
input with frame size selection. Custom Multiple
Source Template brings up a allows you to select
from a variety of available layouts. See Page 15.
5.
Layout - The Layout button allows you to choose
one of many screen layouts as shown on Page15.
6.
Frame Size (if allowed) - The drop down provides
five choices: QVGA - 320 x 240; VGA - 640 x 480;
SVGA - 800 x 600; XGA - 1024 x 768; 720p -1280 x
720. Choose desired frame size.
7.
Frame rate - Enter the selected frame rate with a
maximum of 30 fps.
8.
Bitrate - Enter the bitrate desired with a range
from 128 kbps to 5120 kbps.
9.
Audio format - The drop down provides three
choices: Disabled for no audio; Mono (64 kbs) for 1
channel mono source; Mono (32 kbs) for 1 channel
mono source at a lower bitrate.
10. Archive folder - The location where the files are
saved on the local machine.
11. Archive prefix - The beginning of the file name
saved. A maximum of ten characters is allowed
| HD
Portal plus User Manual Version 1.5 July, 2015
1
2
3
4
5
6
7
8
9
10
11
12
13
14
with no spaces or special characters (only
underscore and dash are allowed.)
12. Enable FTP upload - Check if you want to send the
files to an FTP server after recording. If you check
this another menu will appear.
FTP Server: Enter address of FTP server
FTP user name: Enter registered user of
the FTP server
FTP user password: Enter Password of the FTP
server user
FTP upload directory: Enter the path to where
the file(s) will be stored on the FTP server
Delete: Check this box if you want to delete
local media after upload.
13. Video transcoding - Makes a copy of the recorded
file in the selected format. This provides four
checkbox choices: Windows, H.264, Flash and iPod.
Check the format you want.
14. Enable titles and credits - Select if you want to
insert a JPEG image at the beginning and end of
a recording. You must upload images first in the
Titles & Credits section of the main menu.
15. Submit or Cancel - Click Submit if you want to save
this profile. Click Cancel if you want to reject
Streaming and/or Recording
15
13
Advertisement
Table of Contents
