Basic Operation; First Time Installation - Salora LED1940DVX User Manual

Basic Operation

Power on/off
1. Connect to the power supply with the power cord and turn on the switch.
2. -To turn on the TV
Press POWER button on the TV or remote control.
-To turn off the TV
Press POWER button on the TV or remote control.
Input Source select
Press INPUT button on the TV set or remote control to display input
source menu, and use CH+/- button on the TV set or remote control
to select the input source, press OK button on the remote control to
enter.
Note: Before you select the input source, make sure the
connections are prepared.

First Time Installation

When you initially turn on the TV you will see the first time
Installation menu, and you could search the progeams
immediately according to the hints.
Basic OSD Menu operation
Press MENU(SYS-MENU) button to display the OSD menu as below:
Main menu
Picture
Sound
Channels
Enterainment
Locks
Setup
Hint---you should operate the OSD menu according to the hint.
Use / button to select the main menu, and press
In the submenu, use
adjust, or press button to enter the option menu.
* (Press MENU(SYS-MENU) button to return to the upper menu.)
* (Press SYS-EXIT button to exit the menu display.)
Note1: Only when you input the suitable signal or on the suitable mode, the relevant
items can be activated
Note2: Please operating the OSD menu according to hint on the bottom of the banner.
SETTING
LANGUAGE
OSD TIMER
TRANSPARENCE
OVERSCAN
RESET
MOVE SELECT
(CH+/-) button to select the function item, press
/
FIRST TIME INSTALLATION
LANGUAGE
COUNTRY
START SEARCH
MOVE
ENGLISH
30 SEC
20
ON
MENU EXIT
(CH-) button to enter the submenu.
8
Basic Operation
SOURCE
TV
AV
SCART
YPBPR
VGA
HDMI
DVD
Netherlands
Dutch
SELECT MENU EXIT
Submenu
(Video menu
for example)
/ button to select/