QSC DPA4.2 User Manual page 23

Delay
HOME > OUTPUTS > SPKR PROC > DELAY (ENTER)
Distance measurements are based on the speed of sound being 340 meters/second, or 2.94 milliseconds/meter.
Step 1 — Set the Output Delay Time
F1: A B C D
Outputs > Spkr Proc > Delay
Delay
Limiter
HOME > OUTPUTS > SPKR PROC > LIMITER
NOTE: If you select a QSC Loudspeaker, you will see that the limiter is LOCKED. QSC has given these loudspeakers specifi c limiter
settings tailored for that loudspeaker that should not be changed. If there is a limiter applied in these voicings, you will be able to see the
applied limiter on the graph.
Step 1 — Gain Reduction
F1: A B C D
Outputs
DELAY
LIMITER
Limiter Params
ARRAY
Step 2 — Set the Limiter Mode
F1: A B C D
Type
AUTO
Med
TD-000434-00-A
Delay:
Output
A
Distance
State:
3.4 meters
11.3 feet
State Time (ms)
Bypass 10.0
The Gain Reduction
Output
currently being
A
applied to the
selected Output
channel.
Gain Reduction
0.0 dB
Press Enter to Edit
XO EQ DL LM LM AC
Output
A
SpkrPwr SpkrImp
200W 8.0
Scroll to (Delay Time or Bypass)
0.0 ms to
50.00 ms
0.021 to 1.0 ms increments
Bypass or
On
To edit the Limiter settings, press
Turn to select the mode for the Limiter
23
To edit, press
Turn to adjust parameter
To confi rm, press
To exit, press
To edit the Limiter mode, press
AUTO ADV
To confi rm setting, press
`
`
ENTER
`
`
ENTER
`
EXIT
`
ENTER
`
ENTER
`
OFF
`
ENTER