Table of Contents
Advertisement
Taillamps
1. Open the endgate.
I
U
Remove the two screws
from the lamp assembly.
3. Pull the assembly away from the vehicle.
4. Turn the socket to the left to remove it. Push the tab
in while you turn the socket to the left.
5. Holding
the base of the bulb, pull the bulb straight
out of the socket.
6. Push the new bulb straight into the socket
until
it clicks.
7. Put the socket into the lamp assembly and turn the
socket to the right until it locks into place.
8. Install the lamp assembly and screws.
9. Close the endgate.
Windshield Wiper Blade Replacemen
See "Normal Maintenance Replacement Parts" in the
Index for the proper type of replacement blade.
I
NOTICE:
Use care when removing or installing a blade
assembly. Accidental bumping can cause the arm
to fall back and strike the windshield.
1. To remove the old wiper blades, lift the wiper arm
until it locks into a vertical position.
6-38
Advertisement
Table of Contents
