Headlamp High/Low-Beam Changer - JMC Jimmy 1998 Owner's Manual

If
a
bulb is burned out, replace it to help avoid an
accident. If the arrows don't go
on at all
when you
signal
a turn,
check the fuse (see
"Fuses
and Circuit
Breakers" in the Index) and
for
burned-out bulbs.
If
you have a trailer towing option with added wiring for
the trailer lamps, a different turn signal flasher is used.
With this flasher installed, the signal indicator will flash
even if a turn signal bulb is burned out. Check the front
and rear turn signal lamps regularly to make sure they
are working.
Tbrn Signal On Chime
If your turn signal is left on for more than 3/4 of a mile
(1.2 km), a chime will sound at each flash of the turn
signal. To turn off the chime, move the turn signal lever
to the off position.
Headlamp High/Low Beam Changer
To
change the headlamps from low beam to high or high
to low, pull the multifunction lever all the way toward
you.
Then release it.
When the high beams are
on, this indicator light on
the instrument panel will
also be on.
2-35