he-Piece Front Turn Signal Lamp Assembly
.
Remove the headlamp assembly as shown under
"One-Piece Composite Headlamp System" earlier in
this section.
2. Twist the bulb
socket to remove
it from the
headlamp
assembly.
3. Pull the bulb straight out to remove it from
the socket.
4. Push the new bulb into the socket until
it snaps
into place.
5. Put the bulb socket into the lamp assembly and twist
it to
the right until it is tight.
6. Put the headlamp assembly back into the vehicle.
Install the two ret; ing clips.
6-36