Table of Contents
Advertisement
+ e
+ @
BI-LEVEL A / C : This setting cools the air
entering your vehicle and directs it through the heater
floor outlets as well as the instrument panel outlets.
f l
VENT This setting directs most of the air through
the instrument panel outlets and a small amount through
the floor outlets. The air conditioning compressor is not
working when VENT is selected.
+ '
HEATER: This setting directs most of the
warmed air through the heater floor outlets and some air
through the windshield defroster outlets.
+ '
BLEND: Airflow is divided equally between the
heater floor outlet and the windshield defroster outlets.
DEFROST This setting directs most air through
+e
e
w e
the windshield defroster outlets and some through the
heater
(floor)
outlets.
Electronic Climate Control System
(If Equipped)
I A
Fan Control
The knob on the left side of the electronic climate control
panel controls the fan speed. To manually increase airflow,
move the knob to the right. To manually decrease airflow,
move
it to the
left.
OFF: If the knob is in OFF, outside air
will still enter
the vehicle, and will be directed based on the position of
the mode knob.
AUTO:
If the knob is in AUTO, the fan speed will vary
as the system maintains the selected temperature.
3-3
Advertisement
Table of Contents
