ç Contents
●
After you set the shutter speed or aperture value, the exposure
level may change if you adjust the zoom or recompose the shot.
●
Screen brightness may change depending on your specified
shutter speed or aperture value. However, screen brightness
remains the same when the flash is up and the mode is set to [ ].
●
Images shot at high ISO speeds may look grainy.
●
[
]: Manual
●
At ISO speeds other than [
on your specified shutter speed and aperture value is shown
for comparison to the standard exposure level (3). [ ] or [ ] is
displayed when the difference from standard exposure exceeds
2 stops.
●
Calculation of standard exposure is based on the specified
metering method ( = 156).
●
You can customize camera operation so that turning the [ ] ring
adjusts the shutter speed and turning the [
aperture value ( = 208).
Adjusting the Flash Output
Choose from the three flash levels in [
], an exposure level mark (4) based
] mode.
1
Enter [
z
Set the mode dial to [
] dial adjusts the
Still Images
] mode.
].
204
Movies