Table of Contents
Advertisement
ç Contents
Subjects in flash shots look too bright, highlights are washed-out.
Shoot within flash range ( = 443).
●
●
Lower the flash and set the flash mode to [
●
Adjust brightness by using flash exposure compensation or changing the
flash output level ( = 190, = 204).
White spots appear in flash shots.
●
This is caused by light from the flash reflecting off dust or airborne
particles.
Shots look grainy.
Lower the ISO speed ( = 158).
●
●
High ISO speeds in some shooting modes may cause grainy images
( = 114).
Subjects are affected by red-eye.
Set [Red-Eye Lamp] to [On] ( = 108). The red-eye reduction lamp
●
( = 5) will be activated in flash shots. For best results, have subjects
look at the red-eye reduction lamp. Also try increasing the lighting in
indoor scenes and shooting at closer range.
Edit images using red-eye correction ( = 270).
●
Recording to the memory card takes too long, or continuous
shooting is slower.
●
Use the camera to perform low-level formatting of the memory card
( = 345).
Shooting settings or FUNC. menu settings are not available.
●
Available setting items vary by shooting mode. Refer to "Functions
Available in Each Shooting Mode", "FUNC. Menu", and "Shooting Tab"
( = 407 – = 420).
The Babies or Children icon does not display.
●
The Babies and Children icons will not display if the birthday is not set in
face information ( = 88). If the icons still do not display even when you
set the birthday, re-register face information ( = 89), or make sure that
the date/time are set correctly ( = 338).
] ( = 66).
392
Advertisement
Table of Contents
