Installing Three Crossfirex - ASROCK Z87EXTREME11/ac User Manual

Z87 Extreme11/ac
Step 3
Connect a VGA cable or a DVI cable to the
monitor connector or the DVI connec-
tor of the graphics card that is inserted to
PCIE1 slot.
TM

2.10.2 Installing Three CrossFireX

-Ready Graphics Cards
Step 1
Insert one graphics card into PCIE3 slot,
another graphics card to PCIE5 slot, and
the other graphics card to PCIE7 slot.
Make sure that the cards are properly
seated on the slots.
Step 2
Use one CrossFire Bridge to connect
the graphics cards on PCIE3 and PCIE5
CrossFire Bridge
slots, and use the other CrossFire Bridge
to connect the graphics cards on PCIE5
and PCIE7 slots. (The CrossFire Bridge
is provided with the graphics card
you purchase, not bundled with this
motherboard. Please refer to your graphics
card vendor for details.)
Step 3
Connect a VGA cable or a DVI cable to the
monitor connector or the DVI connec-
tor of the graphics card that is inserted to
PCIE3 slot.
47