Button Functions; (Down) Button; Time Set Button; Snooze/Light (Hi-Low-Off) Button - La Crosse Technology S88907 Instruction Manual

STEP 3:
 Ensure that the transmitter is within 10 feet of the weather station.
 Remove battery cover from transmitter. Slide the battery cover down
and lift off the front.
 Insert two new AA batteries into the TX141TH-Bv2 transmitter.
Observe the correct polarity.
 Within three minutes, the Weather station will show readings in the
remote temperature area on the LCD.
Note: Use Alkaline batteries (or Lithium for temperatures below -20°F/-
28.8°C).
The weather station
has 5 buttons up the
right side and 2
buttons on the front.
Setting-
 Press to decrease values during setting.
 Hold 2 seconds to quickly adjust values.
Default Time Display-
 Press to display minimum temperature/humidity.
 Hold 2 seconds to clear minimum temperature/humidity memory.
Temperature Alert-
 Press to disarm alerts
Default Time Display-
 Press to start or stop a WWVB time signal search
 Hold for 3 seconds to set time/calendar, etc.
Default Time Display-
 Press to change the LCD backlight brightness. HI/LOW/OFF
 Press to activate backlight for 10 seconds.(without adaptor)
Time Alarm-
 Press to activate the snooze function when alarming
Default Time Display-
 Press once to view Heat Index.
 Press twice to view Dew Point.
 Hold to search for Remote sensor.
Model: S88907

Button Functions

▼ (Down) Button

TIME SET Button

SNOOZE/LIGHT (HI-LOW-OFF) Button

HEAT/DEW/SENSOR SEARCH button

www.lacrossetechnology.com/support Page | 5