Connectors; Jumpers: Keyboard Power Setting; Rear Panel Ports - Asus P5KPL-AM SE User Manual

3. Keyboard/mouse power (3-pin PS2_USBPW1-4)
This jumper allows you to enable or disable the keyboard/mouse and USB port 5-6
wake-up feature. When you set this jumper to pins 2-3 (+5VSB), you can wake up the
computer by pressing a key on the keyboard (the default is the Space Bar), clicking
the mouse, or using a USB device. This feature requires an ATX power supply that can
supply at least 1A on the +5VSB lead, and a corresponding setting in the BIOS. The
USBPW56 jumper is for the rear USB ports.
P5KPL-AM SE
P5KPL-AM SE Keyboard Power Setting
1.7

Connectors

1.7.1

Rear panel ports

1
10 9
1. PS/2 mouse port (green). This port is for a PS/2 mouse.
2. LAN (RJ-45) port. Supported by Realtek 10/100 LAN controller, this port allows 10/100
connection to a Local Area Network (LAN) through a network hub. Refer to the table
below for the LAN port LED indications.
LAN port LED indications
ACT LED
Status Description
OFF
Blink Data activity
Blink Data activity
1-9
PS2_USBPW1-4
+5V
(Default)
8
Status
No link OFF
OFF
Orange
+5VSB
2
7 6
Speed LED
Description
No link
10M
100M
3 4
5
ACT/LINK SPEED
LED LED
LAN port
ASUS P5KPL-AM SE