Servicing Or Filling; Lp Gas Container Overfill; Asme Tank - Jayco 2016 Melbourne Owner's Manual

Servicing or filling

Always shut OFF the engine while refueling. Do not smoke and do not operate
other ignition sources while refueling
Because the container is not removable, the motor home will need to be driven to a qualified
propane facility for servicing or filling.
Only the authorized gas service technician(s) should be near the motor home while the
propane tank is being filled. The new propane container must be carefully purged for proper
appliance performance and operation. The propane tank must NEVER BE OVERFILLED.
When the propane container is disconnected from the main supply hose and
the P.O.L. connection, install the P.O.L. plastic cap that is attached to the
container
Replace all protective covers and caps on the propane system and/or container after filling.
Make sure the valve is closed and the compartment door is securely latched.

LP gas container overfill

Never allow your propane tank to be filled above the maximum safe level as indicated by
the fixed liquid level gauge.
Do not allow the visible gauge to be used for filling. Overfilling the propane container above
the liquid capacity indicated on the container, could allow liquid propane to enter the system
that is designed for vapor only creating a hazardous condition.
The following warming label has been placed by the propane container.Propane system.
Maintenance Record
1: Propane fill valve; 2: Propane gauge

ASME Tank


.

Table of Contents
f & p
uel rOpane
S
yStem
87