Quick Start Guide - Crock-Pot CiStir Owner's Manual

quick start guide

1.
WASH parts before using.
We recommend that you wash the Glass Lid
and the Stirring Attachments thoroughly
with warm, soapy water before the first use.
2.
ASSEMBLE stirring lid system.
Insert the Control Module into the Glass Lid,
as shown, making sure that both sides of the
Control Module are evenly locked down into
place. Then select and attach your desired
Stirring Attachment to the Attachment Arm
on the bottom of the Module. (See Page 9
for more information about Stirring
Attachment selection.)
*NOTE: If not using the stirring function then
use the secondary lid attachment.
3.
PLACE lid assembly on your
Crock-Pot Slow Cooker.
®
Set the entire system (Glass Lid, Control
Module and Stirring Attachment) on top of
your Crock-Pot Slow Cooker stoneware, as
®
you would do with a normal lid. ROTATE the
lid clips over the stoneware to lock into place.
4.
CONNECT slow cooker power cord
to the female end of the power cord.
This allows for only one wall outlet to be used for
both the lid and the base unit.
WARNING: DO NOT submerge
Control Module in water or any
E7
!
other liquid.
www.CrockPot.ca