Using The Elevating Leg Rest (Optional) - 2GOability Infineon XS5000 User Manual

Setting angle of the footplate
Footrest (infinite adjustment, figure 5)
To adjust the angle of this footplate, you have to use the supplied wrench number 5.
- You need to loosen the bolt completely, see figure 8;
- The footplate can now be removed from the footrest. Select the desired angle of the plate and turn the
screw well. Note the help dashes at the footplate for choosing the desired angle;
- Make sure the footplate is in place.

5.4 Using the elevating leg rest (optional)

You have the possibility to place an elevating legrest on your wheelchair in stead of a standard legrest. In this
section you can read how to use an elevating legrest.
Swinging the elevating legrest away
- Go to the front of the wheelchair;
- Push the control lever away from you;
- You can now swing the elevating legrest inwards or outwards.
Removing the elevating legrest from your wheelchair
- Go to the front of the wheelchair;
- Push the control lever away from you. You can now swing the elevating legrest inwards or outwards;
- Swing the elevating legrests 90˚ to the outside of your wheelchair and pull the complete elevating legrest
straight up from the tube.
Placing the elevating legrest back on your wheelchair
- Go to the front of the wheelchair;
- Place the elevating legrest with an angle of 90°back on the chair;
- Swing the elevating legrest to the front until you hear a click. This click confirmed that the elevating legrest is
in position.
Setting height of the elevating legrest
To adjust the height of the elevating legrest you need to use the Allen Key number 5.
- View the explanation on „standard legrest‟
- Select the desired height and tighten the bolt down;
- Make sure the footplate is in place and that the length is equal on both sides.
Figure 5
~ 14 ~
Overall user manual