Procedure When Running - Ko Propo EX-10 EURUS Instruction Manual

Procedure when running

1.
Power on：Note surroundings and switch transmitter on, then switch receiver on.
※EX-10 eurus automatically finds unused frequency band after switching on. This function is called "carrier sense".
To perform carrier sense effectively, switch the transmitter on around the running area as close as possible.
2.
Checking model：Watch and check model to be used.
3.
Checking movements：Raise wheels from ground and operate transmitter to
check movements. Detail adjustment using steering/throttle trim lever should be
done while running. Adjust steering balance by performing figure-8.
4.
Power off：Turn OFF receiver, transmitter and remove car battery.
※Make sure to switch the transmitter on and off in an interval of at least 5 seconds.
14
Stand
Figure-8
Trim lever