Attachment And Replacement Of Module; Notes On Installing Receiver (Anti-Noise Measures) - Ko Propo EX-10 EURUS Instruction Manual

▶Attachment and replacement of module

Attach module as shown. When detaching, press both side
of tabs on the module and pull out module.
※For frequency change (2.4GHz, 27MHz, 40MHz), replace module.
Caution!
Turn off transmitter before module replacement.
Caution!
Attach retractable antenna (optional available) when using
frequency 27MHz or 40MHz.
Caution!
Refer to instruction manual included in module.

Notes on installing receiver (anti-noise measures)

Keep antenna cable far away from noise source!
Be careful of noise! Be careful of noise!
Assume that all areas where large currents are flowing
are generating noise! Locate antenna cable and receiver
as far away from the motor, ESC, silicone cables as
possible (material such as metal or carbon chassis also
conduct noise).
R/C model is controlled by radio wave. Therefore,
anti-noise measure is the most important factor. Take
measures to ensure optimum performance of your R/C
model and driving technique.
Carbon chassis
Receiver
ESC
Battery
Silicone cable
RF Module
Motor
11