Default Factory Settings - NETGEAR Wireless Router Setup Manual

NETGEAR Wireless Router Setup Manual

Default Factory Settings

When you first receive your wireless router, the default factory settings are shown below. You can
restore these defaults with the Factory Default Restore button on the rear panel. After you install
the wireless router, use the procedures below to customize any of the settings to better meet your
networking needs.
Wireless Access List (MAC Filtering)
Wireless Network Name (SSID)
Warning: The Network Name (SSID) is case sensitive. Typing nETgear for SSID will not work.
4-6
WIRELESS FEATURE
Wireless Access Point
SSID broadcast
Security
August 2004
DEFAULT SETTING
Enabled
All wireless stations allowed
Enabled
NETGEAR
Not Enabled
Optimizing Wireless Connectivity and Security