Electrolux W5105H Installation Manual page 39

Mount the hose with wires between steam valve and machine.
Connect wires in the steam valve.
Connect ground cable to the terminal ground connection.
Connect the "HEAT" cable connector to the "HEAT" terminal on the I/O board.
24
Steam pressure required:
• minimum: 50 kPa (0.5 kp/cm
• maximum: 800 kPa (8 kp/cm
• recommended: 600 kPa (6 kp/cm
Note!
A steam heated machine is only intended to use clean steam.
Steam connection
2 )
2 )
2 )
"HEAT"
fig.6604
39