Table of Contents
Advertisement
HOW TO USE THE M~UTE/SECO~ T~ER
The Minute/Second Timer
The Minute/Second Timer has three timing
functions:
It operates as a minute timer.
It can be set to delay cooking.
It can be used as a hold setting after defrosting.
The Minute/Second Timer operates without
microwave energy.
How to Time a 3-Minute Phone Call
Step 1: Touch MIN/SEC TIMER pad.
Step
2:
Touch number pads 3, 0 and O (for 3 minutes
and no seconds).
Step
Touch START. Display shows time counting
3:
down. The timer signals when time is up.
How to Defrost, Hold and Time Cook
Let's say you want to defrost a frozen casserole for
15 minutes, hold for 10 minutes and then Time Cook
for 25 minutes. Here's how to do it:
Step 1: Take casserole from freezer and place in oven.
Step
Touch TIME DEFROST pad.
2:
Step
Touch pads 1, 5,0 and O for 15 minutes
3:
defrosting time. (Defrosting is automatically set on
3 but can be changed by touching the
power level
POWER LEVEL pad and the desired power ievel.)
Using a Holding Time
The Minute/Second Timer can also be used to
program a "holding time" between microwave
cooking functions. The time can range from one
second to 99 minutes and 99 seconds. A holding
or standing time may be found in some of your
own recipes or in the Cooking Guide.
Programming Delayed Cooking
To delay cooking up to
99
touch TIME COOK I & 11 pad and enter cook time.
Touch MIN/SEC TIMER and enter number of
minutes to delay cooking. Touch START. Timer
will count down to zero and cooking will begin.
Step 4: Set standing or hold time by
MIN/SEC
touching MIN/SEC TIMER pad.
TIMER
Step 5: Touch 1,0,0 and O to hold for ten minutes.
Step
Touch TIME COOK
6:
TIME COOK
I &11
Step 7: Touch 2,5,0 and O for 25 minutes of
cooking time.
Step 8: Touch START. As
each function is automatically
performed, oven display shows
instructions entered and the
function. When time is up, the
oven signals and flashes "End."
minutes and 99 seconds,
9
Advertisement
Table of Contents
