Table of Contents
Advertisement
YOUR TOUCH CONTROL PANEL
The Touch Control Panel allows you to set the oven
controls with the touch of a finger. It's designed to
be easy to use and understand.
1. DISPLAY. Displays time of day, time counting
down during cooking functions, power level,
cooking mode and instructions.
2. TIME DEFROST. Gentle thawing at automatic
power level 3 (Low). If desired, you may change
power level after entering defrosting time.
3. TIME COOK I & II. Microwave for a preset
amount of time using automatic power level 10
(High), or change power level after entering
cooking time.
4. MINUTE/SECOND TIMER. This feature uses no
microwave energy. It functions as either a kitchen
timer, as a holding period after defrost or as a delay
timer before time cooking.
5. CLOCK. Touch this pad to enter time of day or
check time of day while microwaving.
To set clock, first touch CLOCK pad and then enter
time of day. For example, if time is 1 :30, touch
number pads 1, 3, and O and " 1 :30" will appear in
display. Then touch START pad. To reset or change
time, simply repeat above process.
6. NUMBER PADS. Touch these pads to enter
cooking/defrosting time, power level and time of
day.
7. POWER LEVEL. Touch this pad before entering
another power level if you want to change from
automatic power level 10 (High) for cooking or
power level 3 (Low) for defrosting.
8. CLEAWOFF. When touched, it shuts off the oven
and erases all settings (except time of day).
9. START. After all selections are made, touch this
pad to start the oven.
When You Plug in the Oven
The display panel lights up. After 15 seconds, all
lights disappear and "RESET" appears. Touch the
CLOCK pad to set the clock and oven is ready for use.
If power is disrupted at any time, the above sequence
recurs, and you must reset the Clock.
8
Program Cooking
Use your Touch Control Panel to Time Defrost
or Time Cook with choice of power levels from
1 (lowest) to 10 (highest), time kitchen tasks with
the Minute/Second Timer, and set the Clock.
Create your own programs to suit your individual
cooking style. For example: use the Minute/Second
Timer to delay the start of Time Cook I & II or
program a hold time between Time Defrost and Time
Cook I & II. Set Time Cook I & II for a two-stage
program using different times and power levels.
Advertisement
Table of Contents
