IriSys IRI 4010 User Manual page 20

2) Save – saves the iri file with the same name it had previously. If it was previously unsaved, the Save As...
window appears.
3) Save As... – images are saved using a similar window to the "Open" window in Figure 28, but a file name
must be entered.
4) Revert – restores an image file back to its last saved state.
5) Excel Output... - save a 160 x 120 array of temperature data (assuming emissivity = 1) in comma
separated variable format for use with Microsoft Excel and other spreadsheet applications.
6) Recent Files – a list of recently opened iri files appears here for easy selection.
7) Exit – closes the IRISYS 4000 Series Imager application.
5.3.1.1.2 Edit
The Edit menu contains the following features:
•
Copy
•
Copy to Bitmap
1) Copy - This copies a screen capture of the application window or the thermal image into the Windows
clipboard. This picture can then be pasted into a picture editor or Microsoft office document.
2) Copy to Bitmap – This saves a screen capture of the application window or the thermal image as a bitmap
image using a dialogue box similar to Figure 28 above.
5.3.1.1.3 View
The View menu enables the following features, most of which are also available on the toolbar:
•
Toolbar
•
Status Bar
•
Measurement Cursor List
•
Measurement Cursors
•
Hot & Cold Cursors
•
Area Select
•
Blue Isotherm
•
Red Isotherm
•
Profiles
•
Options
1) Toolbar – This toggles the display of the icon toolbar below.
2) Status Bar – This toggles the display of the status bar, which includes the temperature value and pixel
position of the pixel under the mouse cursor when the mouse is over the image. It also displays the difference
between the midpoints of the isotherms if both the isotherms are enabled.
   
Figure 31: Toolbar
Figure 32: Status Bar
Page 20 of 29
IPU 40108